I'm rebuilding the 1.6 8v motor, crank is .10/.10 and did the plastigage, its a little bit over the limit.  And I checked the torque on hayne it has only the 1.3 and 1.6 16v spec sheets.  Chilton too.  So... if anyone's willing to post the torque specs for 1.6 8v.  I would be greatly appericated.

Thanks

FSM states 24 - 26.5 lb-ft for bearing caps. 36.5 - 41.5 lb-ft for main bearings.

Thanks Rhino!