Hello Guest
« previous next »
Pages: [1]   Go Down

twisted splines ?????

  • 7 Replies
  • 1458 Views

0 Members and 1 Guest are viewing this topic.

*

Offline honduro

  • 18
  • 0
twisted splines ?????
« on: May 31, 2007, 02:57:49 AM »
Trying to disasemble  my rear to install lockers in a 1989 sidekick . I've got the four flange nuts off the rear , the backing plate loose, and cannot get the axle to pull out of the rear .    Is there something else that im missing ? Our alldata at work shows nothing else as in a circlip that holds the axle in. Just wondering if i may have twisted splines ,  by the way either side will come off . Thanks Dennis
Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: twisted splines ?????
« Reply #1 on: May 31, 2007, 03:44:01 AM »
I had to use a slide hammer attached to the end of the axle to get mine out. That bearing is a tight fit in the housing.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: twisted splines ?????
« Reply #2 on: May 31, 2007, 05:58:38 AM »
Yea, what he said  ;) I spent A LOT of time trying to get my axle out before I drove to the local parts house and rented a slide hammer. After a couple of quick tugs it poped right out. I ended up buying one after a few snapped axle shafts.

Zig
Logged
Zukipilot
'92 Liberty Overland Sidekick
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: twisted splines ?????
« Reply #3 on: May 31, 2007, 06:05:37 AM »
I carry a slide hammer in my tool box. that's what it takes to get them out. I also use it to knock them back in.
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline john1974

  • 617
  • 1
  • Gender: Male
  • http://zuknation.net
    • Zuknation
Re: twisted splines ?????
« Reply #4 on: May 31, 2007, 11:58:09 AM »
Big hammer, I got a huge hammer that I hammer on the back... my 87 sammy was hard to get them out the first time, my tracker was alot easier... keep at it!
Logged
 *Image Removed* [/URL]  *Image Removed* [/URL]
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: twisted splines ?????
« Reply #5 on: May 31, 2007, 10:25:48 PM »
You can use a high lift jack as a slide hammer also.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline jason hutchison

  • 495
  • 5
  • Gender: Male
  • ZUKIWORLD Staff
    • ZUKIWORLD Online
Re: twisted splines ?????
« Reply #6 on: June 02, 2007, 06:14:56 PM »
flip the brake drum over and put the nuts back on a couple turns. Use the drum like a slide hammer. They will come out..
Logged
*

Offline calabrias1962

  • 102
  • 0
  • Gender: Male
Re: twisted splines ?????
« Reply #7 on: June 02, 2007, 09:53:32 PM »
Quote from: Hutch on June 02, 2007, 06:14:56 PM
flip the brake drum over and put the nuts back on a couple turns. Use the drum like a slide hammer. They will come out..
Thats an excellent tip thanks :)
Logged
88 Samurai, SPOA,Dual sami Transfer Cases, 513' mini spool rear, Lockrite front 31 10.50 MT's
Pages: [1]   Go Up
« previous next »