Hello Guest
« previous next »
Pages: [1]   Go Down

removing driveshafts.. (tracker)

  • 5 Replies
  • 1157 Views

0 Members and 1 Guest are viewing this topic.

*

Offline stock93tracker

  • 309
  • 0
  • Gender: Male
removing driveshafts.. (tracker)
« on: March 11, 2007, 02:08:32 PM »
how exactly does one get the damn driveshaft out??!? I took off the 4 bolts (surprisingly none were too seized) and now the thing wont come off

I assume it was just the 4 bolts then the driveshaft should pop off the rear and then I should be able to slide it out off the t/c
Logged
93 Geo Tracker
-15 x 7 Rims , 235/75/R15s tires
-2" Lift
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: removing driveshafts.. (tracker)
« Reply #1 on: March 11, 2007, 02:15:11 PM »
they stick sometimes. smackthe flange with a rubber mallet
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline stock93tracker

  • 309
  • 0
  • Gender: Male
Re: removing driveshafts.. (tracker)
« Reply #2 on: March 11, 2007, 02:16:57 PM »
thanks, ill try it..

ironically, I have a rubber mallet in my DD tracker. They're such wonderful tools..
Logged
93 Geo Tracker
-15 x 7 Rims , 235/75/R15s tires
-2" Lift
*

Offline stock93tracker

  • 309
  • 0
  • Gender: Male
Re: removing driveshafts.. (tracker)
« Reply #3 on: March 11, 2007, 02:35:27 PM »
groovy, worked like a charm..  I just didnt want to start smacking it around in case I had to do something else to get it loose (like other bolts or something.
Logged
93 Geo Tracker
-15 x 7 Rims , 235/75/R15s tires
-2" Lift
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: removing driveshafts.. (tracker)
« Reply #4 on: March 11, 2007, 02:40:28 PM »
I used a wire brush to clean both flanges. and put a thin film of grease on the allignment ring.
makes it come off easier next time.  believe me there will be a next time .
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline stock93tracker

  • 309
  • 0
  • Gender: Male
Re: removing driveshafts.. (tracker)
« Reply #5 on: March 11, 2007, 02:47:23 PM »
these are just gonna be stored for later use, aint using them yet.

just stripping down what I can on my new parts car for quick use when I break something on the daily driver this summer.   ;D
Logged
93 Geo Tracker
-15 x 7 Rims , 235/75/R15s tires
-2" Lift
Pages: [1]   Go Up
« previous next »