Hello Guest
« previous next »
Pages: [1]   Go Down

cam timing

  • 10 Replies
  • 2671 Views

0 Members and 2 Guests are viewing this topic.

*

Offline edjeep1

  • 25
  • 0
  • Gender: Male
  • i love my sammy !!!!!!!!!!!!!!! !!!!!!!!!!!!!!!
cam timing
« on: January 15, 2005, 05:49:38 PM »
i need help! cant get the timing rite if anyone can help please let me in on it
Logged
87 samuari 31's spring over FNJEEPS!!
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: cam timing
« Reply #1 on: January 15, 2005, 05:59:59 PM »
Ya working on a pinto or what???
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: cam timing
« Reply #2 on: January 15, 2005, 06:07:45 PM »
Don't know why, but the mark on the
crank goes up, and the notch on the
cam pulley goes down, Dizzy pointing
to #1 cylinder (front)

That should do it if you got a 1.3-1.6
Zuk motor, if it's a pinto, sorry I don't
remember, it's been 25 years since I
last did one of those

Wild
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline edjeep1

  • 25
  • 0
  • Gender: Male
  • i love my sammy !!!!!!!!!!!!!!! !!!!!!!!!!!!!!!
Re: cam timing
« Reply #3 on: January 15, 2005, 06:11:25 PM »
thanks for the help thats what i keep getting
Logged
87 samuari 31's spring over FNJEEPS!!
*

Offline explosivo

  • 3157
  • 0
  • Gender: Male
  • I'm in the northern part of that one state.
    • omghi2u Gen. Discussion Forums
Re: cam timing
« Reply #4 on: January 15, 2005, 07:00:34 PM »
Quote
Don't know why, but the mark on the
crank goes up, and the notch on the
cam pulley goes down, Dizzy pointing
to #1 cylinder (front)

That fucked me up for about a week when I redid my head
Logged
omghi2.us[/url]
"Its a ZUKI thing. Doing more with less than less with more." -- HotRod
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: cam timing
« Reply #5 on: January 16, 2005, 01:34:57 AM »
Were you in a round room  ;D
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline explosivo

  • 3157
  • 0
  • Gender: Male
  • I'm in the northern part of that one state.
    • omghi2u Gen. Discussion Forums
Re: cam timing
« Reply #6 on: January 16, 2005, 01:51:30 AM »
Quote
Were you in a round room  ;D

A padded one, yes.
Logged
omghi2.us[/url]
"Its a ZUKI thing. Doing more with less than less with more." -- HotRod
*

Offline mesjr2004

  • 422
  • 0
  • Gender: Male
Re: cam timing
« Reply #7 on: January 16, 2005, 02:08:27 AM »
will it just not start ? when i put my track belt on i took the cap,rotor plugs,plug wires valve cover,off and ran the valves all at the same time , when i got it back togather it wiuld only run on 2 cyl.  i messed w it all day trying to figure out what i had done wrond,well i finally went out to my sammy and the fireing order on my sammy was different i changed track firing order to sammy order and it ran fine, THE RAPAIR MANUEL WAS WRONG. i was furios and relieved at the same time
Logged
*

Offline mahimahimo

  • 377
  • 0
  • Gender: Male
Re: cam timing
« Reply #8 on: January 16, 2005, 08:45:19 AM »
what about the adjustable cam pully from rro   ... that make a big diff cuase i would personally liek to have a little more torque in lower rpms http:// http://www.rocky-road.com/kickpulley.html
Logged
*

Offline mahimahimo

  • 377
  • 0
  • Gender: Male
Re: cam timing
« Reply #9 on: January 18, 2005, 06:47:58 AM »
so has any one ever used this thing ?

                            -mo
Logged
*

Offline Bobzooki

  • 1754
  • 2
  • Gender: Male
  • Web Wheeler
Re: cam timing
« Reply #10 on: January 18, 2005, 07:17:35 AM »
Quote
so has any one ever used this thing ?


A word of caution:  These are made by Rotational Dynamics.  Rotational Dynamics seems to have gotten out of the Track/Kick game.  I don't think they make them any more!  They're not on RDI's web page any more.
Logged
Bob

Tahoe 24' Fish-N-Fun Tritoon
115 HP Mercury outboard
Pages: [1]   Go Up
« previous next »