Well I installed the Calmini 2.5" lift last night. All went pretty good, only broke the front two a-arm bolts taking them off. A quick run to Home Depot for new bolts and locknuts and I was back at it. The kit is pretty good, nice parts and a pretty easy install. It took me about 6 hours with the run to Home Depot from start to finish. Not to bad for a lift kit, in my opinion. I do have some camber issues as others have had, I am bringing it in for an alignment this afternoon so all should be well after that.
Anyway, to the pics....
 Bill

It's pretty,  now you have to enjoy wheeling 

Looks good.  How'd you manage to break the bolts?  I could barely get those loose.  Took a breaker bar and me pushing down on it with my foot each time.

You might need some camber bolts.

looks SWEET

what size engine is it

I broke the bolts because they were stuck (rusted) in the bushings. I couldn't get them to budge so I used a breaker bar and a cheater bar about 2 feet long.. lol  Snapped the heads off and then used a sawzall to cut the other side off.
  The engine is a 2.0 4cyl..

 Bill

i love the 2Litre engine!!

i had extractors on my old 2L, helped with the bigger tyres.

its rare to see a gv softtop and when you do thay are 1.6L, i hope the 06 grand comes in a softtop, the hard top is still 1.6 and has no low range.

fordy1, I dunno about in Oz but here in the States the '07s are getting transfer cases with 4 low as an option in all trim/options levels.  No 2 doors though.  MAYBE you guys will see 4 low in all of your levels as well, 2 doors too?

its rare to see a gv softtop and when you do thay are 1.6L, i hope the 06 grand comes in a softtop, the hard top is still 1.6 and has no low range.