Hello Guest
« previous next »
Pages: [1]   Go Down

Can't get into 1st, 3rd and 5th?

  • 4 Replies
  • 890 Views

0 Members and 1 Guest are viewing this topic.

*

Offline lacrosse10604

  • 50
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Can't get into 1st, 3rd and 5th?
« on: August 28, 2006, 06:29:05 PM »
I installed a homemade 3" BL on my 93 4dr 'Kick, flipped the strut mounts and installed 1.75" coil spacers. I removed the shifter to extended 3". Reinstalled it. Now I can't get into 1st, 3rd or 5th gear.

Anyone know what's up?
Logged
Searching for a donor for my diesel build.
*

Offline gravity_storm

  • 108
  • 0
  • Gender: Male
  • The wino and I know
Re: Can't get into 1st, 3rd and 5th?
« Reply #1 on: August 28, 2006, 06:46:27 PM »
sounds like the shifter is hitting on the body. Remove the console & boot and anything else that blocks the view. I would think the two options are bend the shifter or expand the hole in the floor.
Logged
1996 Sidekick, 1.5" homegrown body lift, 2" Digger suspension lift, home made snorkle, front skid
*

Offline lacrosse10604

  • 50
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Re: Can't get into 1st, 3rd and 5th?
« Reply #2 on: August 28, 2006, 07:16:51 PM »
Guess I need to clarify. I expanded the opening enough to get into all the gears.....
Logged
Searching for a donor for my diesel build.
*

Offline gravity_storm

  • 108
  • 0
  • Gender: Male
  • The wino and I know
Re: Can't get into 1st, 3rd and 5th?
« Reply #3 on: August 28, 2006, 07:19:54 PM »
Interesting.. Does it feel like it is hitting something? I can't imagine what else it could be. Mine's an auto so it wasn't an issue.
Logged
1996 Sidekick, 1.5" homegrown body lift, 2" Digger suspension lift, home made snorkle, front skid
*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Re: Can't get into 1st, 3rd and 5th?
« Reply #4 on: August 28, 2006, 07:27:05 PM »
There is a plastic coupler that goes at the tip of the stick. It has fallen off and is rolling around in the shifter mechanism. Fish around with a coat hanger tward the rear of that mechanism (after removing the shifer) It may require you to pop the whole thing off the top of the trans. Its not that hard though. its only held on by 5 12 mm bolts.

Mike
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
Pages: [1]   Go Up
« previous next »