Hello Guest
« previous next »
Pages: [1]   Go Down

Quick Exhuast Question

  • 5 Replies
  • 1355 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Flork

  • 40
  • 0
Quick Exhuast Question
« on: June 09, 2006, 10:30:48 AM »
Could I run a 2 inch calmini exhuast system without a Cat. Converter? Is there any sensors, or other problems I would need to worry about if I did this?

1991 2 dr. Tracker, Auto

Thanks
Logged
91 2dr., 3spd auto, 5.12's, 30x9.5 BFG AT's on 15x7's, Calmini exhaust and plates.
*

Offline Flork

  • 40
  • 0
Re: Quick Exhuast Question
« Reply #1 on: June 09, 2006, 10:32:12 AM »
BTW, no emissions laws here in Alberta
Logged
91 2dr., 3spd auto, 5.12's, 30x9.5 BFG AT's on 15x7's, Calmini exhaust and plates.
*

Jayzuki

Re: Quick Exhuast Question
« Reply #2 on: June 09, 2006, 10:50:38 AM »
Yes! I am sure it will reduce your overall soundquailty [ personal opinion ] and will be much louder than if you keep your CAT on. You'll get better fuel economy but will produce more harm-full emissions. Either way if your running CALMINI your good to go! I plan too cut the CAT on my next machine and run the MINI system. Also have no AIRCARE here.

Your talking about the FULL SYSTEM? HEADER TO CATBACK?
Logged
*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: Quick Exhuast Question
« Reply #3 on: June 09, 2006, 11:52:26 AM »
   I changed to 2" exhaust with no cat on my 92 and there were no issues.  Sounds a lot better too!!
Logged
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed
*

Offline Flork

  • 40
  • 0
Re: Quick Exhuast Question
« Reply #4 on: June 09, 2006, 01:09:26 PM »
Not going with the header. Just the exhaust.

I knew I needed a new muffler, but after my local exhaust shop got my truck on the lift they found that my cat was pretty rotten and I needed a new tailpipe section....So basically, I need an entirely new exhaust system.

I think I'll go with the filter combo...

Thanks for the replies.
Logged
91 2dr., 3spd auto, 5.12's, 30x9.5 BFG AT's on 15x7's, Calmini exhaust and plates.
*

Offline CodeBlue

  • 55
  • 0
  • I Love ZUKIWORLD!
Re: Quick Exhuast Question
« Reply #5 on: June 09, 2006, 11:19:10 PM »
if your cat is the right size you could just take a big screwdriver and hammer/chisel out the honeycomb inside.
Logged
Pages: [1]   Go Up
« previous next »