Ok the moron that had my kik before me " yes moron he drilled a hole through the head into the block and used a 3/4 inch piece of all thread instead of a head bolt" FYI it has a newer rebuilt motor. any back to the question the afor mentioned moron striped the tranny drain plugs, not the threads, the part that the 3/8ths ratchet goes into. I talked to a cupple of trany places and
its going to range from 50 to 200 bucks to have them take it out ----- one of the tranny places told me that i should just take a cold chisel and hammer and use that to unscrew the pluge and just replace it with a new one.
what do you guys think?