Hello Guest
« previous next »
Pages: [1]   Go Down

gear lash

  • 4 Replies
  • 1567 Views

0 Members and 1 Guest are viewing this topic.

*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
gear lash
« on: December 23, 2005, 04:46:51 PM »
 ??? Hey guys, in the process of installing my arb, and as per practice, before i removed the old diff I measured the gear lash between ring and pinion. I got readings of .003 and .005  90 + 180 degrees apart. I checked this several times as it seemed a tad tight to me. This is the used gear set I picked up for my auto, and it has about 130k on it. All the teeth look good, and it ran quiet. That just seems tight to me, but what do I know, my 1st zook. Any input on this would be greatly appreciated!  Thanks
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: gear lash
« Reply #1 on: December 24, 2005, 12:44:54 AM »
Spec is .008 so yours was not way too
tight, but a little more wouldn't hurt
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: gear lash
« Reply #2 on: December 24, 2005, 03:48:10 AM »
Thanks Wild, I may add a bit to the new set up.  BTW, how many posts does it take to move up from newbie status anyway?
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: gear lash
« Reply #3 on: December 24, 2005, 12:19:58 PM »
I dunno, about 200 or so
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: gear lash
« Reply #4 on: December 25, 2005, 07:23:16 AM »
 ;D  That should't  be too long, as I keep f%#$king up and having to get help! Thanks again , I really appreciate this forum, and all the expert advise. Mike
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
Pages: [1]   Go Up
« previous next »