Hello Guest
« previous next »
Pages: [1]   Go Down

kicker 3 in a sammy

  • 2 Replies
  • 1103 Views

0 Members and 1 Guest are viewing this topic.

*

Offline mesjr2004

  • 422
  • 0
  • Gender: Male
kicker 3 in a sammy
« on: December 18, 2005, 01:56:07 PM »
 ok. my buddy is installing a kicker 3 in his sammy . seems its not fitting so good. the transfer case is not located in the same spot , it needs to be clocked down a few degres so he can use the tcase mount he has. he has the mighty kong and it wont match anything anymore , has anyone done this conversion and had the same problem? hs pretty pised about it .
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: kicker 3 in a sammy
« Reply #1 on: December 18, 2005, 10:27:49 PM »
If you can't get it let me know(p.m. me)I have a friend that put one in today in his sammie, maybe you could loosen up the bolts on the adapter tube and clock it just a little bit, or use the bolt and poly trick on the kong and mix and match the poly's to get it to fit?( loose the stock rubber mounts x3) I have a kong on mine and I mix them two poly and one stock mount.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline zooky

  • 135
  • 0
  • Gender: Male
Re: kicker 3 in a sammy
« Reply #2 on: December 23, 2005, 04:02:37 PM »
I modified the Kong arms:
Logged
Pages: [1]   Go Up
« previous next »