Hello Guest
« previous next »
Pages: [1]   Go Down

Budget Buildup

  • 8 Replies
  • 2497 Views

0 Members and 1 Guest are viewing this topic.

*

Offline explosivo

  • 3157
  • 0
  • Gender: Male
  • I'm in the northern part of that one state.
    • omghi2u Gen. Discussion Forums
Budget Buildup
« on: March 30, 2005, 07:36:31 AM »
Alright, so I'm thinking about taking parts Tracker #3, making some home-made coil spacers and doing a 2-3" BL (ala Nate and Heather's budget lift guide) to fit the 31's off my Bronco so that I have a play toy for the summer while I'm waiting on SAS funds for the black Tracker.

But anyway, to anyone who's made their own coil spacers: what material did you use, and where did you get it? Are there any places online that sells plastic in thicknesses of 1.5-2" that's tough enough for coil spacers?

Also, where's the best place to buy new CV shafts from? Are there any nation-wide auto parts stores that sell lifetime warranty CV's?
« Last Edit: March 30, 2005, 07:37:32 AM by explosivo »
Logged
omghi2.us[/url]
"Its a ZUKI thing. Doing more with less than less with more." -- HotRod
*

Offline Bobzooki

  • 1754
  • 2
  • Gender: Male
  • Web Wheeler
Re: Budget Buildup
« Reply #1 on: March 30, 2005, 08:46:19 AM »
Quote
Are there any nation-wide auto parts stores that sell lifetime warranty CV's?


Sure - NAPA - but after having my NAPA replacement axle explode into two pieces at Moab, I have to question if it's worth the lifetime warrantee...
Logged
Bob

Tahoe 24' Fish-N-Fun Tritoon
115 HP Mercury outboard
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: Budget Buildup
« Reply #2 on: March 30, 2005, 12:30:38 PM »
Quote
Alright, so I'm thinking about taking parts Tracker #3, making some home-made coil spacers and doing a 2-3" BL (ala Nate and Heather's budget lift guide) to fit the 31's off my Bronco so that I have a play toy for the summer while I'm waiting on SAS funds for the black Tracker.

But anyway, to anyone who's made their own coil spacers: what material did you use, and where did you get it? Are there any places online that sells plastic in thicknesses of 1.5-2" that's tough enough for coil spacers?
Quote

hey, when you find some good material get some extra and i'll buy if off you, sound good?  i need and small set of spacers too :-[ ;D

stu
« Last Edit: March 30, 2005, 12:31:11 PM by 1bigtracker »
Logged
   
*

Offline mesjr2004

  • 422
  • 0
  • Gender: Male
Re: Budget Buildup
« Reply #3 on: March 30, 2005, 01:09:43 PM »
Quote


Sure - NAPA - but after having my NAPA replacement axle explode into two pieces at Moab, I have to question if it's worth the lifetime warrantee...


so i guess you made it home ok. how did it do in 1 weel drive?

 marshall
Logged
*

Offline SnoFalls

  • 1358
  • 3
  • Gender: Male
Re: Budget Buildup
« Reply #4 on: March 30, 2005, 01:27:19 PM »
explosivo,

just drill out heep spacers ... they are workin good for me ... and at $40 was cheap enuf to not worry about fab/hunt time.

Also, if your just going to run 1.75 spacers, the cv's will live long enuf (knock on wood).

Don't forget to spool/weld up that rear if you really wanna thrasher :)

Logged
I don't suffer from insanity, I enjoy it.

Buy-it, Build-it, Beat-it, Part-it
*

Offline explosivo

  • 3157
  • 0
  • Gender: Male
  • I'm in the northern part of that one state.
    • omghi2u Gen. Discussion Forums
Re: Budget Buildup
« Reply #5 on: March 30, 2005, 09:58:01 PM »
Quote
explosivo,

just drill out heep spacers ... they are workin good for me ... and at $40 was cheap enuf to not worry about fab/hunt time.

Also, if your just going to run 1.75 spacers, the cv's will live long enuf (knock on wood).

Don't forget to spool/weld up that rear if you really wanna thrasher :)


It's $40 a pair for jeep spacers, right? That's just a bit less than $100, which is a lot of money for this project. :P

Stu, if I find any material, I'll give ya a PM ;)
Logged
omghi2.us[/url]
"Its a ZUKI thing. Doing more with less than less with more." -- HotRod
*

Offline adamd

  • 369
  • 0
  • Gender: Male
  • sofa king we todd it
Re: Budget Buildup
« Reply #6 on: March 30, 2005, 11:18:33 PM »
Quote

It's $40 a pair for jeep spacers, right? That's just a bit less than $100, which is a lot of money for this project. :P

Stu, if I find any material, I'll give ya a PM ;)




Can u say hockey puck?
Logged
'98 kick
3" B/l
30" Mud Kings
*

Offline Digger

  • 1991
  • 1
  • Gender: Male
  • 1996 Suzuki X-90 4X4
Re: Budget Buildup
« Reply #7 on: March 31, 2005, 11:49:54 PM »
I made up some sets of 1.5" thick spacers that I'll sell ya cheap! ;)
Logged
Had a cool sig pic till I changed the text... sigh...
90 Tracker: "Silver", 2" BL, 1-1/2" Coil Spacers, Strut mount flip, Calmini Header, Winch, 31" Swamper radials, Sold.
98 Suzuki X-90: Calmini 2" Sus, 1-1/4" whl spcrs, 2" Exhaust, Cobra Safari Bar, Neon, Sold.
96 Suzuki X-90: Mostly stock daily driver(for now)
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: Budget Buildup
« Reply #8 on: April 01, 2005, 08:23:35 AM »
go on J**pkings.ca, and place an ad in the wanted, a guy there sells them, cost me 120cdn for 8, 1 inch spacers.  he can make any thickness,
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
Pages: [1]   Go Up
« previous next »