Hello Guest
« previous next »
Pages: [1]   Go Down

4.62's and a 4.16

  • 4 Replies
  • 1249 Views

0 Members and 1 Guest are viewing this topic.

*

Offline IKUZUS

  • 21
  • 0
  • Gender: Male
  • You're right, I don't understand!
4.62's and a 4.16
« on: April 02, 2005, 01:11:14 PM »
Anybody run this combo in a Sammi? If so, what size tires do you run?
Logged
You're right.........I don't understand.
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: 4.62's and a 4.16
« Reply #1 on: April 02, 2005, 02:02:19 PM »
different front and rear diff gears?  you are going to kill your transfercase.   Dont, I dont care who said it's ok
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: 4.62's and a 4.16
« Reply #2 on: April 02, 2005, 02:39:43 PM »
I think he is talking about 4.16 T-case
and 4.62 diff gears, I don't think the
4.16 T-case gears are low enough to
be streetable, I think the setup is best
with the super crawler 8:1 T-case set

Wild
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline IKUZUS

  • 21
  • 0
  • Gender: Male
  • You're right, I don't understand!
Re: 4.62's and a 4.16
« Reply #3 on: April 02, 2005, 03:18:22 PM »
4.62 axle gears and a 4.16 tcase. Also have the late model tranny. Thanks for any help.
Logged
You're right.........I don't understand.
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: 4.62's and a 4.16
« Reply #4 on: April 02, 2005, 04:50:47 PM »
you could run 31's or 33's just fine, with 31's you might be running just a few more rpm's over stock.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
Pages: [1]   Go Up
« previous next »