Hello Guest
« previous next »
Pages: [1]   Go Down

help front a-arm bolt

  • 5 Replies
  • 1853 Views

0 Members and 2 Guests are viewing this topic.

*

Offline track_this

  • 332
  • 0
  • Gender: Male
  • Live for something or die for nothing
help front a-arm bolt
« on: September 17, 2003, 11:44:33 AM »
i cant seem to get the front a-arm bolt out so i can install my skid plate/bumper(procomp). i got the nut off of the back side but cant seem to get the friggin bolt out any idea's?
Logged
1994 geo tracker 1.6L 16v 4x4 2dr soft top 5.12 gears.MODS:
calmini 3 inch sus. lift
rear lockright
31" kumho m/t's
RRO 2" body lift custom snorkel front & rear trail tough bumpers-Tabor 9k winch(warn) 100amp alt. grand vitara steel 3rd member
*

Offline Natebert

  • 1098
  • 0
  • Gender: Male
Re: help front a-arm bolt
« Reply #1 on: September 17, 2003, 12:28:56 PM »
After trying to  turn bolt using a 24 inch breaker bar and twisting rubber bushing in half.  We used a sawzall and sawed off the head, then replaced bolts.  Of course we were replacing the bushings anyway with the Calmini 2 inch lift.  Sorry, but the driver side bolt was impossible to remove on our truck.

maybe try some WD-40 over night.

Good Luck.
Logged
*

Offline track_this

  • 332
  • 0
  • Gender: Male
  • Live for something or die for nothing
Re: help front a-arm bolt
« Reply #2 on: September 17, 2003, 06:43:47 PM »
do you mean that both of the bolts would not come out? also i see you installed the bumper, on the top where they say to use the self tapping screws, did those work, because i even drilled a pilot hole and they striped right out. thanks
Logged
1994 geo tracker 1.6L 16v 4x4 2dr soft top 5.12 gears.MODS:
calmini 3 inch sus. lift
rear lockright
31" kumho m/t's
RRO 2" body lift custom snorkel front & rear trail tough bumpers-Tabor 9k winch(warn) 100amp alt. grand vitara steel 3rd member
*

Offline Natebert

  • 1098
  • 0
  • Gender: Male
Re: help front a-arm bolt
« Reply #3 on: September 18, 2003, 03:50:42 AM »
Quote
do you mean that both of the bolts would not come out? also i see you installed the bumper, on the top where they say to use the self tapping screws, did those work, because i even drilled a pilot hole and they striped right out. thanks


We got one side out, undamaged, we let it soak, overnight with liberal amounts of WD-40 applied every few hours.  The otherside was frozen solid in the bushing and we ended up ripping the bushing trying to get it out and had to resort to the saw.
Logged
*

Offline hcgalvin

  • 1695
  • 1
  • Gender: Female
  • Roads? Where we're going, we don't need roads.
    • Granite Path
Re: help front a-arm bolt
« Reply #4 on: September 18, 2003, 05:06:46 AM »
Quote
do you mean that both of the bolts would not come out? also i see you installed the bumper, on the top where they say to use the self tapping screws, did those work, because i even drilled a pilot hole and they striped right out. thanks


The self tappers never really worked. We ended up having to put some larger screws on there. However, whenever we gave the skid plate any abuse or took it over washboardy roads the screws would sometimes come out. Since we don't have our front bumper plastic cover attached, we just tack welded the tabs directly to the front bumper metal base. Problem solved for now. We will be getting rid of the bumper soon. We need more approach angle in the front.

Heather
Logged
Heather Galvin
2005 GV with Zuki Nation 4.5" Lift.
Sidekick's gone... Still have Bob's Knob.
*

Offline brlj

  • 512
  • 1
  • Gender: Male
  • 6" Lift w/ 33x12.50 TSL Radials, Exoskeleton
    • Bills 93 Tracker
Re: help front a-arm bolt
« Reply #5 on: September 21, 2003, 02:28:51 PM »
When I installed my 3" lift I had to cut all but 2 of the a-arm/control arm bolts. No parts store had those sizes with the same shoulder length. I had to go to a dealer and buy them  :-X  expensive!!!

Hope things work out for you,

Later,
Bill
Logged
Pages: [1]   Go Up
« previous next »