Hello Guest
« previous next »
Pages: [1]   Go Down

Front body panel swap

  • 3 Replies
  • 1516 Views

0 Members and 3 Guests are viewing this topic.

*

Offline jagular7

  • 1026
  • 0
  • Gender: Male
  • Jagular7
Front body panel swap
« on: January 09, 2004, 03:10:59 PM »
Since most of the 3rd gen. US models, ie. Vitara, XL-7, X-90, of Suzuki use basically the same mechicals, I wonder if the front body panels are swappable. For example, taking a X-90 front fenders, hood, bumper, headlights, and swapping them onto a Vitara or XL-7.
Logged
Lenexa, KS
*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Front body panel swap
« Reply #1 on: January 09, 2004, 03:41:54 PM »
hhhhhmmmmm i dunno have you tried to do a google search on it? thats what i usually do when i have ideas (usually dont pan out) but its worth a try  ;)
Logged

my lug nuts require more torque then my engine makes ;)
*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: Front body panel swap
« Reply #2 on: January 10, 2004, 04:57:20 AM »
I doubt it :( I just looked at mine (X-90 and Kick) and it does not look like it would bolt on. After the snow melts off the X I will look at it closer.
Zig
Logged
Zukipilot
'92 Liberty Overland Sidekick
*

SpinalTap

Re: Front body panel swap
« Reply #3 on: January 10, 2004, 05:26:20 AM »
I doubt that any of the panels would line up properly. The doors are shaped differently, as is the cowl. I suspect the XL7 is wider than the X90 so the hood wouldn't be wide enough leaving a nice big gap between the hood and fenders. Can it be done? Sure...but you'd best be a dern good bodyman if you want it to turn out right ;)
Logged
Pages: [1]   Go Up
« previous next »