Weber carbourator problems

somersetzuk

14
0

Weber carbourator problems

« on: November 04, 2012, 01:11:21 PM »

Cant seem to adjust it just right any tips or secrets to these things. my problem is hit a bump an it will kill out i can pull up my drive way an it will kill out. any help will help me out thanks.

Logged

rascott

669
15
Gender:
tread lightly monkeywrench a little

Re: Weber carbourator problems

« Reply #1 on: November 04, 2012, 09:45:18 PM »

perhaps the float is set too high.
uphill may pour gas into venturi, if this were the case. mabe bumps too.(?)
have you looked inside it before?
32/36 weber?

Logged

'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.

Capt

738
28
Gender:
LIFT IT ! .......Fat Chicks CAN'T JUMP !!

Re: Weber carbourator problems

« Reply #2 on: November 05, 2012, 09:02:28 AM »

Is It Really a WEBER?

Stock Hitatshi carbs will do this when the Metering & Shut off solenoid is going south.
It is a NON-REPLACEABLE part. Only option is to get a different carb.

Haven't heard of a Weber having this problem.

Logged

somersetzuk

14
0

Re: Weber carbourator problems

« Reply #3 on: November 06, 2012, 01:24:12 PM »

IT IS A 32/36 weber SO I DONT KNOW I HAVE HEARD I NEED TO BEND MY FLOATS

Logged

rascott

669
15
Gender:
tread lightly monkeywrench a little

Re: Weber carbourator problems

« Reply #4 on: November 06, 2012, 07:29:59 PM »

i still think it would be worth opening it up and checking the float set.
you mentioned it cuts out going uphill?

Logged

'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.