snorkeled exhaust

flanny

67
0

need some advise on where to snorkel my exhaust? im trying to figure out how to run my exhaust for high water, as some of you already know i have a 91' sammy with a 11" lift and a ford v8 302 HO under the hood well partially

any ideas on routing it for the pipe for high water?

Logged

91 SAMMY
8" LIFT
33X12.50
4.53 GEARS
FORD 5.0 HO MOTOR WITH TRANNY

mrfuelish

2862
13
Gender:
you must have a perception problem.

Re: snorkeled exhaust

« Reply #1 on: March 05, 2012, 03:02:20 PM »

the muffler on my Willy's has the pipe going through it all the way for strength and has a three bolt flange on the end of the tail pipe to bolt the snorkel to. you will have to brace the snorkel some how? my Willy's has a bracket with a pin in it.

Logged

1987,1988,1988,1990 samurai's, 1953 m38a1, 1996 x-90,blue.1996 x-90 red.1994 2 door tracker. only Dead Fish go with the flow. No Hairy Nosed Wombats were ran over on the trail today. My ZUK is Xenophobic.

flanny

67
0

Re: snorkeled exhaust

« Reply #2 on: March 06, 2012, 05:22:57 AM »

so yours is running out the rear? im really just trying to decide where to run the pipe out at.

Logged

91 SAMMY
8" LIFT
33X12.50
4.53 GEARS
FORD 5.0 HO MOTOR WITH TRANNY

mrfuelish

2862
13
Gender:
you must have a perception problem.

Re: snorkeled exhaust

« Reply #3 on: March 06, 2012, 05:14:57 PM »

I don't have the pipe but it did have one at one time and it looks like it just went up at the back corner, It has a plug to go into the bell housing and the vac stuff on the carb. (maybe pressure for the dist cap?) if you have the front pipe also.

Logged

1987,1988,1988,1990 samurai's, 1953 m38a1, 1996 x-90,blue.1996 x-90 red.1994 2 door tracker. only Dead Fish go with the flow. No Hairy Nosed Wombats were ran over on the trail today. My ZUK is Xenophobic.