hallo   frrom Greece again i will try to post pictures today (i hope)
this is what i got after an accident 2 years ago
i am thinking of 3 inches up 30x9.5x15 tyres
but first i will have to cut the rear of the car and build a roll cage ect ect any suggestiions will be most apriciciated
tnx in advance and sorry for my english looking forward to see some reply well now lets start posting i hope i can do it

i 've done it i posted photos !!!!!! lol

It will be interesting on how you repair that crunch.
For a roll cage, if you have access to a Tubing/pipe bender when we built the roll cage for Drone637 race car we listed the angles and dimensions.  http://www.zukiworld.com/forum/build-diaries-how-to-diy/project-trouble/30/  Roll cage starts on page 4.

Good luck and keep the photos coming.

i am not going to repair it i am thinking of cutting away the rear of the chassis hoppefully,  and then build a half rall cage for the rear.
Well i will try at least 
and yes i will post more photos on the way tnx for your link.

There are a couple of traybacks pictured here:

http://forum.difflock.com/viewtopic.php?t=42994

tnx for the link yes this is what i have in mind (something like that) tnx again any help is apriciated