Hello Guest
« previous next »
Pages: [1]   Go Down

Broken accelerator cable

  • 2 Replies
  • 783 Views

0 Members and 1 Guest are viewing this topic.

*

Offline jga154

  • 28
  • 0
    • Jim Arnold Blog
Broken accelerator cable
« on: February 16, 2011, 03:48:25 PM »
I just broke the accelerator cable in my 86 Samurai. It looks to be difficult to unhook it from the carb since I can't even see the end. Are there any tips or tricks to replacing the cable?

Thanks,

Jim
Logged
86 Samurai Tin top, OME Springs, Bonz shackles, 30x9.50, 4.9:1 TC, rear Lockright locker, Rocky Road Outfitters DIY front bumper
*

Offline tipover

  • 422
  • 4
  • Gender: Male
Re: Broken accelerator cable
« Reply #1 on: February 16, 2011, 04:42:50 PM »
its not that hard. on the carb side, just loosen the 12mm adjusting bolts and remove the cable from the bracket.  the end of it looks like the end of a bicycle hand brake end.  to pull the end off pull the cable 90 from the cam to slide the end out.
Logged
Wheeler-87 Samurai JX. 7" lift, 1.6 TBI, lockers hybrid rear, 33" Swampers, 6 to 1s in a billet housing.
RV Dingy-2003 2 door tracker
Tow-97 PSD F250 Crew SB Dana 60 conversion
87 samurai-spoa ZookEV electric conversion.
RV- 31' Monaco Mckenzie
*

Offline jga154

  • 28
  • 0
    • Jim Arnold Blog
Re: Broken accelerator cable
« Reply #2 on: February 16, 2011, 06:07:05 PM »
OK, thanks.
Logged
86 Samurai Tin top, OME Springs, Bonz shackles, 30x9.50, 4.9:1 TC, rear Lockright locker, Rocky Road Outfitters DIY front bumper
Pages: [1]   Go Up
« previous next »