Hello Guest
« previous next »
Pages: [1]   Go Down

Question on thread pitch for the PCV valvle

  • 4 Replies
  • 1126 Views

0 Members and 3 Guests are viewing this topic.

*

Offline jweese

  • 20
  • 0
  • Gender: Male
Question on thread pitch for the PCV valvle
« on: February 18, 2011, 07:47:24 PM »
I am trying to put in a new pcv valve in my 86 and can't get the new one to thread in.  I need to tap the hole in the intake but i don't know what tap to get.  I've tried 14/1.5mm die and it seemed a lttle loose on the old valve threads so then I tried a 1/4 18 NPT thread thinking it might be a pipe thread and the die is too small.   >:(  Does anyone know what tap and die to use for that?  It's the last thing I need to get the vehicle running good.
Logged
'86 Samurai, SPOA lift, blue with some rust
*

Offline jweese

  • 20
  • 0
  • Gender: Male
Re: Question on thread pitch for the PCV valvle
« Reply #1 on: February 19, 2011, 08:16:31 AM »
Someone has to know...
Logged
'86 Samurai, SPOA lift, blue with some rust
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Question on thread pitch for the PCV valvle
« Reply #2 on: February 19, 2011, 11:07:56 AM »
Try giving Hawk Suzuki or Low Range a call, they might know off hand.  If I need to find a thread I'll usually go to a hardware store and just start trying out random nuts until I find one that fits.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline jweese

  • 20
  • 0
  • Gender: Male
Re: Question on thread pitch for the PCV valvle
« Reply #3 on: February 19, 2011, 04:42:03 PM »
THat's what I did.  Two trips to the automotive store and one to home depot.  I believe it's a 1/4 NPT but I want to make sure before I go tapping into the intake manifold. ???
Logged
'86 Samurai, SPOA lift, blue with some rust
*

Offline tipover

  • 422
  • 4
  • Gender: Male
Re: Question on thread pitch for the PCV valvle
« Reply #4 on: February 23, 2011, 01:03:48 AM »
Is it tapered?
Logged
Wheeler-87 Samurai JX. 7" lift, 1.6 TBI, lockers hybrid rear, 33" Swampers, 6 to 1s in a billet housing.
RV Dingy-2003 2 door tracker
Tow-97 PSD F250 Crew SB Dana 60 conversion
87 samurai-spoa ZookEV electric conversion.
RV- 31' Monaco Mckenzie
Pages: [1]   Go Up
« previous next »