Hello Guest

How do I put bulb in 2000 Vitara dome light?

  • 1 Replies
  • 1591 Views

0 Members and 1 Guest are viewing this topic.

How do I put bulb in 2000 Vitara dome light?
« on: January 19, 2011, 11:22:19 AM »
OK I have tried prying and poking around and do not want to break the dang thing.  The front dome light bulb burnt out and I cannot get the cover off to put new bulb in.  Any suggestions?

*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: How do I put bulb in 2000 Vitara dome light?
« Reply #1 on: January 21, 2011, 01:43:47 PM »
The plastic lense pops out.  With a very thin screwdriver or similar, insert and pry from the side.  The locking tabs are pretty shallow, so it won't put up that much of a fight.
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com