Hello Guest

rebuild or replace engine

  • 4 Replies
  • 1456 Views

0 Members and 5 Guests are viewing this topic.

rebuild or replace engine
« on: August 23, 2010, 04:10:49 PM »
I have one cylinder that is 30 psi rest are 120.  I pured oil in the cylinder and rechecked and it jumped up >100. So I guess I am looking at rings/piston-who knows.  Speedo says 75,000, but i could be 275,000 for all I know.

Is it worth it to try to rebuild these sammy motors (??? bucks) vs replace (???).  Where can I even find a used engine?

This is depressing, I was looking forward to fixing my new toy-
thanks for the help.

*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: rebuild or replace engine
« Reply #1 on: August 23, 2010, 06:51:36 PM »
Get a set of rings, some rod and main bearings and have the valves
either ground or replaced depending on their condition, then put in
a new water and oil pump and a new timing belt, you need a gasket
set and hone the cylinders, this will reuse the old pistons and go another
trip around the planet before you need another engine.

This is like $300 in parts and a whole lot of satisfaction that you brought the
engine back to life

Wild
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.

Re: rebuild or replace engine
« Reply #2 on: August 25, 2010, 05:31:35 PM »
where is the best place to order the parts needed to rebuild?
Thanks a ton

*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: rebuild or replace engine
« Reply #3 on: August 26, 2010, 03:26:57 PM »
Low Range Off Road has great service.  Sammy Pro is another good source when dealing with engine related items.
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing

*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: rebuild or replace engine
« Reply #4 on: August 26, 2010, 04:03:21 PM »
I bet you can find a good 1.6 8 valve to drop in it for about the same $ and less work and get more power to boot . But then of course, you won't have the satisfaction of building your own engine, several times if you've never done it before! >:D
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER