the paint is Durabak that you roll it on.



http://www.durabakcompany.com/index.htm

the top is from http://www.acceleratedsupply.com/ccp0-catshow/sidekick.html

nice

you got bigger pics?

I am interested in how the color will hold up.  How thick do you think you have it applied?  I could consider redoing my floors & side panels with it, and it comes in the appropriate colors.

nice

you got bigger pics?

i can sent you some bigger pic

I am interested in how the color will hold up.  How thick do you think you have it applied?  I could consider redoing my floors & side panels with it, and it comes in the appropriate colors.

it was   2 coats. Approximately 1/16th of an inch
you can get a free sample chip at  http://www.durabakcompany.com/emailform.htm.

How do you like the top?  What others did you consider?

the top fits good. i got the black denim and the dark charcoal tinted windows.
it was a week to get it. there is no wind noise.

one local company will coat the inside with "box liner" thickness and then spray the outside in a thinner coat. We shot the side of a Jeep that was coated with this with a 12 guage shot gun at about 25' and it didn't make much of a mark.....he tried the slug after but that is another story and that did leave a mark.....left some glass in the bottom of the door and a hole in the seat.

I'm not sure about the stuff you've got but the porfessional box liner stuff was a pain if you wanted to weld in some panels or need to get to the metal to do some work.