Hello Guest
« previous next »
Pages: 1 [2]   Go Down

03 XL7 2.7 ECM automatic pinout (wiring diagram) needed

  • 22 Replies
  • 6888 Views

0 Members and 2 Guests are viewing this topic.

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #15 on: July 01, 2009, 04:19:03 PM »
I am going out to Walker Valley on Sunday, and then putting it in garage to remove dents and swap out motor.  It still does not seem that big of a job.  Wiring could fool me, and will have to modify the driveline (or drivelines).  I was waiting for the Boot to drop at work, but that may be a while, so will start Tuesday.
I never received the PDF files mentioned earlier, but JGTH on Zuharrie supplied me with these pfd files.  Also I got a set of 2003 Grand Vit/XL7 FSM's for $10 ea + shipping.  So now with all this support, off to the garage next week.
(Files are of the ECM wiring diagram 03 - 2.7l V6)
« Last Edit: July 01, 2009, 04:21:47 PM by BRD HNTR »
Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline ebewley

  • 6551
  • 64
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #16 on: July 01, 2009, 04:23:28 PM »
At first look, it seems like that third diagram will get the rig running. On the drivelines, you shouldn't have to change them, the t-case bolts in the same spot. Of course you may be meaning fine spline vs. course spline rear output?

-Eric
Logged
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #17 on: July 01, 2009, 05:20:38 PM »
This is an auto, and about 4" longer, with much larger splines.

here is ECM pinout, I can't make a pdf outof it, but it is readable if you try.  I have the pins that will wire over to my old ECM cable (I hope).  I do not have fuel guage in there, or ECT (hope to figure those out before done.  If you see something I am missing, or could use PLEASE fill me in.



Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #18 on: July 02, 2009, 02:33:46 PM »
'02 XL-7 wiring diagram .pdf files.

1-4 of 18
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #19 on: July 02, 2009, 02:35:03 PM »
'02 XL-7 wiring diagram .pdf files.

5-8 of 18
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #20 on: July 02, 2009, 02:36:31 PM »
'02 XL-7 wiring diagram .pdf files.

9-12 of 18
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #21 on: July 02, 2009, 02:37:37 PM »
'02 XL-7 wiring diagram .pdf files.

13-16 of 18
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 03 XL7 2.7 ECM automatic pinout (wiring diagram) needed
« Reply #22 on: July 02, 2009, 02:38:13 PM »
'02 XL-7 wiring diagram .pdf files.

17-18 of 18
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
Pages: 1 [2]   Go Up
« previous next »