Hello Guest
« previous next »
Pages: [1]   Go Down

rear shocks on a 92 sidekick

  • 4 Replies
  • 1712 Views

0 Members and 2 Guests are viewing this topic.

*

Offline Suzuki1.8

  • 283
  • 0
  • Gender: Male
  • Tires so low looks like i'm riding on blades
rear shocks on a 92 sidekick
« on: April 05, 2009, 09:41:11 PM »
So i know this question has been answered but i can't seem to find it in my search. How long of shocks should i buy for a 2inch coil spacer lift?
Logged
*

Offline derekj

  • 784
  • 1
  • Gender: Male
  • i'm the canadian guy eh?
Re: rear shocks on a 92 sidekick
« Reply #1 on: April 05, 2009, 10:43:52 PM »
Logged
91 Sidekick jx
2" BDS supension lift
2" BDS body lift
1" Coil spacers
32" TSL's and some other stuff I did And now with a Lockrite!  www.cardomain.com/memberpage/783382
*

Offline Lindenmooch

  • 560
  • 0
  • Gender: Male
  • Just another paranoid android.
Re: rear shocks on a 92 sidekick
« Reply #2 on: April 05, 2009, 10:44:10 PM »
I have a 1991 Geo Tracker(virtually the same as your sidekick), and when I bought my spacers from Jeff1997....I bought a pair of shocks from the rear of a 1991 Ford Crown Victoria.  They were 15 dollars each.   Very cheap!  All I had to do was cut/hammer/pry out the metal sleeves from the bushings on my old shocks, and shove them into the crown vic shocks.  Was kind of a pain.....since I was using very primitive hand tools(hammer...  =/ )  Would take about 5 seconds with a decent cutting tool(angle grinder).  
Logged
*

Offline MUD CHILD

  • 355
  • 9
Re: rear shocks on a 92 sidekick
« Reply #3 on: April 06, 2009, 12:13:54 AM »
I just built and installed a 2" spacer lift on my buddy's Tracker, I put in shocks from a 98 crown vic they fit good and it rides nice. Only thing is I wish they were a little longer to allow more drop
Logged
NO DITCH TO DEEP NO HILL TO STEEP

http://srcustoms.ca/
*

Offline hegemon

  • 112
  • 4
  • Gender: Male
Re: rear shocks on a 92 sidekick
« Reply #4 on: April 06, 2009, 06:44:53 AM »
95 mustang shocks are the right length, and they bolt right in.  The crown vic shocks are common, but you will need to hammer the metal sleeve out of your original shock and use it in the crown vic shocks.
Logged
Pages: [1]   Go Up
« previous next »