Hello Guest

what are some good aftermarket carbs

  • 5 Replies
  • 1908 Views

0 Members and 1 Guest are viewing this topic.

what are some good aftermarket carbs
« on: April 05, 2009, 09:29:40 AM »
I am looking for a aftermarket carb for a 88 samurai with the stock 1.3L It is strickly a off road use only and i trailer it to the trails. I heard that the webers are not the best for offroad use. I have two spare carbs sitting around one is for a SJ410 sidedraft and the other is a aisin. But I am looking for a performance upgrade as well.

*

Offline whitestanger

  • 18
  • 0
  • Gender: Male
Re: what are some good aftermarket carbs
« Reply #1 on: April 05, 2009, 01:10:17 PM »
Try Low Range Off Road they have the webers and the my-side systems never used either I am in the market for a good carb myself.
1988 1/2 Samurai
6" breeze Industries SPOA lift & trac bar
4" Body Lift
33"x13.50" Super Swampers on off set 15" rims
5"-10" drop shackles front and rear
Skyjacker Shocks
Russel stainless steel brake and fuel lines
Fuel cell
10 000  winch front
3000  winch rear
custom bumpers

*

phloop

Re: what are some good aftermarket carbs
« Reply #2 on: April 05, 2009, 08:01:28 PM »
Stay away from the weeber and check out this. http://www.zuksoffroad.net/samurai_engine.htm The MY sides are after the MY-FI. I had a weeber and tossed it for a MS2 with the Screaming Eagle. Well worth the coin.

*

Offline TrakJD

  • 232
  • 1
Re: what are some good aftermarket carbs
« Reply #3 on: April 05, 2009, 09:46:29 PM »
Stay away from the weeber and check out this. http://www.zuksoffroad.net/samurai_engine.htm The MY sides are after the MY-FI. I had a weeber and tossed it for a MS2 with the Screaming Eagle. Well worth the coin.


x2

I have MYside, it kicks ass.

*

Offline Luc

  • 51
  • 0
Re: what are some good aftermarket carbs
« Reply #4 on: April 05, 2009, 09:59:12 PM »
I've got a pony carb, it works really well.

we also used a holley single barrel for a while...it worked well too.

Re: what are some good aftermarket carbs
« Reply #5 on: April 06, 2009, 08:28:18 AM »
what kind of holley carb will fit a 1.3L zuk intake