Hello Guest
« previous next »
Pages: [1]   Go Down

Heater Fan Problems

  • 3 Replies
  • 1961 Views

0 Members and 2 Guests are viewing this topic.

*

Offline Loyal

  • 47
  • 0
Heater Fan Problems
« on: August 25, 2004, 06:37:24 AM »
I just turned on the fan this morning and noticed that it will only work on the Top setting.

Is this a common problem?
Would this be the fan or a linkage of some sort?
Is is difficult to fix?
Logged
Loyal

1997 4 Door Kick
*

Offline trackermad

  • 150
  • 0
  • Gender: Male
Re: Heater Fan Problems
« Reply #1 on: August 25, 2004, 07:33:32 AM »
Its a easy fix...  Most likely your resistors burnt up. Just remove your glove bos and look in behind it there are some wires that hook into the air box just in front of the fan.  One screw and you can pull the resistors out.  You can get them from a dealer for about 20 bucks or sorce one from a junker.
Logged
"First of all: what is work? Work is of two kinds: first, altering the position of matter at or near the earth's surface relatively to other such matter; second, telling other people to do so."  ~Bertrand Russell
*

Offline jerryp58

  • 449
  • 0
  • Gender: Male
Re: Heater Fan Problems
« Reply #2 on: August 25, 2004, 09:28:32 AM »
Bad switch?
Logged
Jerry
1990 Geo Tracker,  2-Door Hard Top
1.6L 8v, 4x4 Automatic, 0" lift
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Heater Fan Problems
« Reply #3 on: August 25, 2004, 02:07:58 PM »
I had the switch do that, the solder comes
loose and just needs to be re soldered with
some silver bearing solder, as it has a higher
melting temp

Also you need to soldered it in the trucklet
as I don't think there is a plug for the switch
to be removed from the wiring harness

Good Luck

Wild
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
Pages: [1]   Go Up
« previous next »