Hello Guest
« previous next »
Pages: [1]   Go Down

door hinges?

  • 6 Replies
  • 1483 Views

0 Members and 1 Guest are viewing this topic.

*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
door hinges?
« on: September 13, 2008, 09:55:52 PM »
how does everyone take there doors off?   

i saw a picture where they cut the top hinge so it was like a jeep and i also saw real expensive billet hinges that where made to pull off from a Suzuki site


thanks guys
Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
*

Offline v-stone

  • 625
  • 2
Re: door hinges?
« Reply #1 on: September 13, 2008, 10:10:26 PM »
I cut the top of the hinge off on my old samurai and it worked great.
Logged
SAS Tracker! No looking back now.
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: door hinges?
« Reply #2 on: September 14, 2008, 01:41:22 AM »
I did the same.  Just cut the top of the hinge off.  Instant removable doors. 
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: door hinges?
« Reply #3 on: September 14, 2008, 04:18:59 AM »
Don't forget to cut one of the door pins slightly shorter or it will be hard to put the doors back on.

Do a search for removable doors at Ack's FAQ (link in signature) to find two articles on how to do the mod.
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
Re: door hinges?
« Reply #4 on: September 14, 2008, 11:29:05 AM »
thanks guys big help! im going to check out the article now
Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
*

phloop

Re: door hinges?
« Reply #5 on: September 14, 2008, 12:32:28 PM »
Quote from: ack on September 14, 2008, 04:18:59 AM
Don't forget to cut one of the door pins slightly shorter or it will be hard to put the doors back on.

Do a search for removable doors at Ack's FAQ (link in signature) to find two articles on how to do the mod.

Make sure you cut the top pin shorter and not the bottom, it will make it easier to put the doors back on. I also beveled the pins to make it easier to put them back on.
Logged
*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
Re: door hinges?
« Reply #6 on: September 14, 2008, 10:17:18 PM »
alright thanks guys
Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
Pages: [1]   Go Up
« previous next »