Hello Guest
« previous next »
Pages: [1]   Go Down

Buying Bolts?

  • 10 Replies
  • 1799 Views

0 Members and 1 Guest are viewing this topic.

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Buying Bolts?
« on: April 30, 2007, 12:12:35 PM »
So where is a good place to get grade 8 bolts of SAE bolts?  How do you know if they are grade 8 or SAE.  Need to replace some broken ones to finish up the repairs. 
Logged
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2
*

copperfever

Re: Buying Bolts?
« Reply #1 on: April 30, 2007, 12:20:46 PM »
There is a "Tool and Anchor" store in my town that supplies Grade-8 nut/bolts in just about all sizes. The bolts have a mark on the head that indicates the grade-8 rating, and they are usually gold in color.
Logged
*

Offline DRAGGINZUZU

  • 141
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Re: Buying Bolts?
« Reply #2 on: April 30, 2007, 02:46:17 PM »
I get most of my grade 8 stuff from tractor supply. they sell it by the pound. something like $3.85?? They dont have really big stuff though
Tony
Logged
Its not what you buy but what you build
 Tony
*

phloop

Re: Buying Bolts?
« Reply #3 on: April 30, 2007, 04:12:19 PM »
You can tell the grade by looking at the marks on the head of the bolt or on the nut too washer surface of the nut. Off the top of my head I do not remember the markings. Some thing like 5 marks for grade 8 and 3 marks for grade 5. But as CRS has set in, do not quote me on that.
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Buying Bolts?
« Reply #4 on: April 30, 2007, 06:33:24 PM »
I CAN BUY THEM AT THE LOCAL ACE HARDWARE
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

g-man

Re: Buying Bolts?
« Reply #5 on: April 30, 2007, 06:36:59 PM »
Any hardware store or a place like Fastenal, dont know if they have those in your area. I know the grade 8 bolts I use are gold colored while the grade 5 are silver, dont know if that is an industry standard though.
Logged
*

NEW_ZUKER

Re: Buying Bolts?
« Reply #6 on: April 30, 2007, 07:17:37 PM »
Osh Hardware, they have a great selection and they are cheap, like 23 cents for 1.5 inch long grade 8, but thats in California, I know tractor supply has them for sure but none close enough to me to know pricing or anything. Phloop has it right with the markings, also on the nuts it is 3 round dots for grade 8, a quick search should make it easier.
Logged
*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Buying Bolts?
« Reply #7 on: May 02, 2007, 10:55:57 AM »
Hey thanks guys yeah I read something about the lines on the head of the bolts tell their grade.  I have a harbor freight store close by they might have some.  Would Lowes?
Logged
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2
*

Offline MRDEAN40

  • 20
  • 0
Re: Buying Bolts?
« Reply #8 on: May 02, 2007, 01:23:32 PM »
Here is a great place to buy them online if need be; https://www.boltdepot.com/Default.aspx
Logged
*

kingzoo

Re: Buying Bolts?
« Reply #9 on: May 03, 2007, 08:29:05 PM »
  NAPA carries grade 8 bolts and hardware in metric and standard sizes from big to little.Not too bad on price either.
Logged
*

Offline kirknd4spd

  • 333
  • 0
  • Gender: Male
Re: Buying Bolts?
« Reply #10 on: May 03, 2007, 09:04:07 PM »
i get all my bolts at lowes or home depot
Logged
89 Sidekick - 2 door soft top, 1.6, auto, 4x4, 3" suspension lift, 31x10.50's on 15x8 Mickey Thompsons, long tube header
Pages: [1]   Go Up
« previous next »