Hello Guest
« previous next »
Pages: [1]   Go Down

coil spacers center hole bore

  • 5 Replies
  • 1577 Views

0 Members and 1 Guest are viewing this topic.

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
coil spacers center hole bore
« on: February 07, 2007, 01:12:46 PM »
i just bought some jeep tj coil spacers for my 94 track and i need to know the size to bore the center hole out to....the current hole is 2 1/8" in diamater
Logged
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD
*

Offline TysonS

  • 383
  • 0
  • Gender: Male
  • www.funinbc.com
Re: coil spacers center hole bore
« Reply #1 on: February 07, 2007, 04:47:30 PM »
2.5" im about 95% sure on that
Logged
2 Dr. 91'  8v Sidekick| 3" Body Lift | 4" Gas Tank Lift | 3.5" Suspension Lift | Snorkel | Custom Bumpers | Sliders | 31" LTB's | Detroit | 4.24 Tcase | TT front locker soon
*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: coil spacers center hole bore
« Reply #2 on: February 07, 2007, 06:40:50 PM »
ok thankyou...but this coil spacer has a lip which seems that it would sit down into the coil to keep it in place...if i bore it out to 2.5 in then it will no longer be there...is that lip absolutely needed?
Logged
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD
*

Offline Digger

  • 1991
  • 1
  • Gender: Male
  • 1996 Suzuki X-90 4X4
Re: coil spacers center hole bore
« Reply #3 on: February 07, 2007, 08:02:48 PM »
Logged
Had a cool sig pic till I changed the text... sigh...
90 Tracker: "Silver", 2" BL, 1-1/2" Coil Spacers, Strut mount flip, Calmini Header, Winch, 31" Swamper radials, Sold.
98 Suzuki X-90: Calmini 2" Sus, 1-1/4" whl spcrs, 2" Exhaust, Cobra Safari Bar, Neon, Sold.
96 Suzuki X-90: Mostly stock daily driver(for now)
*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: coil spacers center hole bore
« Reply #4 on: February 07, 2007, 09:44:10 PM »
im goin to drill the center to 2.5in so should that be enough? on the one side of the spacer there is a cone shape drill down in bout 1/2" im guessing this is where it will sit on the coil cup?
« Last Edit: February 08, 2007, 04:17:51 AM by museboy07 »
Logged
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD
*

Offline PHX96TRACK

  • 90
  • 0
  • Gender: Male
Re: coil spacers center hole bore
« Reply #5 on: February 10, 2007, 08:42:30 PM »
I did mine today 2.5 is right. My daystar 1-3/4" jeep spacers didn't fit in front I had to bore them out. They did fit fine in back tightly... I need a drill bit to finish the rear shock mounts. I'll be done tomorrow if I can figure out the camber situation.
Logged
96 4dr Tracker - 30x9.5s on 1-3/4" spacer lift. 2.25" Cat-back with Turbo exhaust.
DD is a Stock 93 Toyota Paseo- great car
2003 Toyota Matrix XRS- Family car
Pages: [1]   Go Up
« previous next »