Hi there

just getting started in the zuki sceen, but been off roading 12 yrs...........just bought a 20 v6 and fitted a calmini 3" lift and 3" body........very happy but keep breaking front axle cases.....been told that the GV is a still case and harder........ordered one but now wanting some help on what diff to fit........im running 235 85 16 tyre's,,,,,it seems a little slugish on the road........................................can any one help ................................

mark

england

5.83 if you can get them  Calmini will have the front one and put your name down with Boondox Motorsports for their rear bulk order otherwise you will be limited to 5.125's from the 1.6 Vit. If you were in the US you could have hunted around and tried to find some rare 5.38's or 5.62's.  If yours is a manual you should have 4.62's or if it's auto then 4.875's as stock. Changing the t-case gears for something like Trail Toughs 4.2's will have a big impact offroad in low range.

i had 2.0 4cylinder vitara softtop , it was slugish after i put 225/75/r16s on it.
                                                                                    (215/60/16 stock)


Extractors fixed this and car now had a Grrroouuwwllll

thanks for the help,,,,,,and do you know if i have to do any mod's  to fit a early vit in the front or rear,,,,,,,,,,,,,,i have the chance of SJ 413 diffs for free do you know if they'll fit


mark

uk

Hi,

I replied to your PM but also keep in mind that idealy you are looking for 26spline sidegear fronts and 12 bolt rears to make life easy.