ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: allian on December 12, 2005, 10:46:06 PM
-
i know i've seen a few kicks and sammies with home made snorkels... just wondering if anyone has made one for a 92 kick? if so what kind id tubbing did you use? meterials?
i really want to start swamping asap. :)
thanks again!
-
There are tons of them, run a search. People just use some tubing, it isn't that hard and is pretty cheap to do.
-
Here's mine (92 kick) if you have Q's, ask ;)
(http://images.fotopic.net/y8nnqv.jpg)
(http://images.fotopic.net/y8nnqw.jpg)
(http://images.fotopic.net/y8nnq0.jpg)
(http://images.fotopic.net/y8nnqz.jpg)
(http://images.fotopic.net/y8nnqu.jpg)
-
Here's mine (92 kick) if you have Q's, ask ;)
([url]http://images.fotopic.net/y8nnqv.jpg[/url])
([url]http://images.fotopic.net/y8nnqw.jpg[/url])
([url]http://images.fotopic.net/y8nnq0.jpg[/url])
([url]http://images.fotopic.net/y8nnqz.jpg[/url])
([url]http://images.fotopic.net/y8nnqu.jpg[/url])
YEAH! thats looks really good! just wondering what did you use for the top of the snorkel(dryer vent)?
-
here are some pics of my snorkle i have been running it for about 2 years no problems unless the mass airflow sensor goes then u have to disconect it.
(http://memimage.cardomain.net/member_images/1/web/769000-769999/769479_10.jpg)
(http://memimage.cardomain.net/member_images/1/web/769000-769999/769479_11.jpg)
(http://memimage.cardomain.net/member_images/1/web/769000-769999/769479_12.jpg)
here is a link to my page http://www.cardomain.com/ride/769479/2 if u rock crawl a hand throtle my be another good idea.
-
i have a similar set up to tracker8wr except i used exhaust flex pipe. 2-1/4 and i bashed my hood a little to fit it. dont have a fitting on it i just run it straight back, i havent tested it for complete suction, im sure pvc would work better, but its better than stock. it i stick hold my hand over it, it sucks really hard so i know it works better than no snorkel. just remember if you are traversing deep water, anything you have is better than nothing and blowing a hole in your motor.
-
YEAH! thats looks really good! just wondering what did you use for the top of the snorkel(dryer vent)?
Thx, top it just a 45 degree elbow with some bits cut out of the walls (at the top), to let the air through. And on top of that a cap that normally will be fitted to a larger pipe to close it off. All glued together ;D real cheap, set me back maybe 20-30 bucks ;D
-
Some Lowes carry ABS tubing which looks much better then PVC, mine came out like this:
-
it's easy, just measure 3 times, and cut once. probably better if you do a mock up first
-
you guys have been a BIG help!
thanks! ;D
-
WHO NEEDS A SNORKLE?
check this out...
http://videos.streetfire.net/player.aspx?fileid=3676567A-C37F-4EC0-BCE0-EDB4400C7BBD
Ok, I thought my air intake was near the firewall in the fender well, not behind the headlight. It was my first time out wheeling. I had a jeep friend with me in case somthing happened. That was only suppose to be 2 ft of water.
-
Hello,
Look for more details my homepage! www.ploeteraar.nl
click on the left side "techniek" (second button) and click on "snorkel" on the left side to (first button). There are somthing pictures of my homemade K&N snorkel.
For guestions mail!!!!
-
Very nice job de Ploeteraar. 8)
For us english speaking folks, go here:
http://www.systranbox.com/systran/box
Paste this http://www.ploeteraar.nl/techniek/snorkel.html in the web page box.
Select "Dutch to English"