ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: JAMES44 on March 13, 2017, 02:30:44 AM

Title: STEERING KNUCKLE SEALS
Post by: JAMES44 on March 13, 2017, 02:30:44 AM

  Just done the steering knuckle seals on my Suzuki sj413 Samari took longer than i thought it was  quite a fiddly job even with my inspection pit
      should be okay now for quite a long time ...only changed one of the felt gaskets as the other one looked okay....wonder if any one else has done that job .....on their Suzuki Jeep  ???????

Title: Re: STEERING KNUCKLE SEALS
Post by: Drone637 on March 16, 2017, 05:03:16 PM

That was always a pain on my SJ.  The metal plates just never wanted to line back up properly.

Title: Re: STEERING KNUCKLE SEALS
Post by: JAMES44 on March 17, 2017, 12:24:48 AM

Know what you mean,  did you put the rubber seal back on with the cut part at the top ...ie 12 oclock i made a mistake and put it at half way
    thanks Jim