ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: patico on November 15, 2016, 07:23:19 AM

Title: Original jack dimensions
Post by: patico on November 15, 2016, 07:23:19 AM

Hello guys and gals.

A few days ago I bought an used 2001 Tracker. 4dr, 4x2, AT.
It came without its original jack, and I have found myself unable to find the right size online.
I can buy one for cheap close to my house, but I need to know the size first.

If someone has the dimensions, or is kind enough to take out his jack and measure it, I'd be greatly helpful.
According to my understanding, what I need is the length of the threaded bar.

Thanks in advance, and hopefully in the future I can be of help to someone else.

Patico!

Title: Re: Original jack dimensions
Post by: hwyman on November 15, 2016, 11:10:30 AM

not sure if it is the same jack but I have a spare one from a 94 model I will try to get measurements and pics of with a ruler next to it if you would like.

Title: Re: Original jack dimensions
Post by: patico on November 16, 2016, 07:30:12 AM

Thanks a lot.
Gladly, I found a similar car last night, and the owner allowed me to measure the jack.

While compressed, it's 8cm tall and 38cm long (not counting the cranking part)   (3¼" x 15" aprox)
The base is 12cm x8 cm (5"x3" aprox).

Title: Re: Original jack dimensions
Post by: TioPick on April 20, 2017, 07:49:14 PM

Yea, me too.  I bought a 2001 Tracker ZR2 with no jack, hack handle , lug wrench...  Can you tell me even more?