ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Build Diaries, How-To, DIY => Topic started by: joew on May 21, 2016, 06:33:44 PM

Title: 1992 1.6 into 1990 body
Post by: joew on May 21, 2016, 06:33:44 PM

Hey new to this.  Installed 1992 1.6 motor Geo tracker into 1990 4wd body   Any help full hints on wiring ignition coil/distributor up so I can get spark??  Please help, I have chiltons manual but not able to get spark.  I do have juice to coil?  Any help appreciated!

Title: Re: 1992 1.6 into 1990 body
Post by: beatthezombie on August 26, 2016, 11:24:05 AM

Whoops, it appears that I have posted in the wrong thread, sorry about that.

Title: Re: 1992 1.6 into 1990 body
Post by: Rhinoman on September 02, 2016, 11:21:26 AM

You need to use the distributor and coil from the 90. The 92 distributor is for an ECU with spark control, the 90 is a stand alone ignition.