ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RideorDie on April 23, 2016, 11:16:19 AM
-
Hey guys recently tore into the transmission on my 1987 Suzuki samurai 5 speed. Come to fine out the input shaft needs replaced. The only problem is I do not know where to get the syncro that goes on the input shaft. If someone could direct me to one of these that would be great thank you.
-
Have you tried Cobra Transmission? $33.99 for a synchronizer kit.
https://cobratransmission.com/index.php?main_page=index&cPath=2_1834&zenid=4cf8389e27b096cd16ff91abab9dbb7f
-
No I have not Im a toyota guy usually and just dont know where to look for parts for a samurai
-
Gotcha.
I recently purchased a rebuild kit for a Tracker 5-speed tranny from Cobar. I was happy with the quality of the kit minus the fact it did not include three needle bearings in their re-build. But... the old ones appeared to be good to go so they are back in the tranny and running. So far, after about 1K miles, I have no complaints of the component quality of their kits.
-
No I have not Im a toyota guy usually and just dont know where to look for parts for a samurai
Gotcha.
I recently purchased a rebuild kit for a Tracker 5-speed tranny from Cobra. I was happy with the quality of the kit minus the fact it did not include three needle bearings in their re-build. But... the old ones appeared to be good to go so they are back in the tranny and running. So far, after about 1K miles, I have no complaints of the component quality of their kits.
-
The only thing is I hate to buy a whole syncro kit when I only need the one that goes on the input shaft