ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Msims on January 16, 2016, 05:36:07 PM

Title: Suzuki samurai head studs
Post by: Msims on January 16, 2016, 05:36:07 PM

I'm having a problem with my samurai and finding head studs I have done bought new head bolts and everything it is a built 1.3 turbo with a 500holley I need help trying to find head studs ASAP! Thanks

Title: Re: Suzuki samurai head studs
Post by: Capt on January 17, 2016, 05:59:48 PM

Head Studs ?
I have extra "take out" head bolts that I will gladly send you free.
Do you mean the piloting collars, got pix

Title: Re: Suzuki samurai head studs
Post by: fordem on January 18, 2016, 05:23:51 AM

Here's my question - if you already have new head bolts why are you looking for head studs?

Correct me if I'm wrong, head bolts & head studs perform the same task, securing the head to the block, but, on a Suzuki G13 engine, bolts are used and not studs.

Title: Re: Suzuki samurai head studs
Post by: Skyhiranger on January 20, 2016, 10:36:31 AM

From what I recall, people have gotten head studs for the 1.3 from ARP.
You might also check with some of the samurai vendors...
Trail Gear
Low Range Offroad
etc.

Title: Re: Suzuki samurai head studs
Post by: Boxcar on January 27, 2016, 08:45:16 AM

 Replacing the bolts with studs is an upgrade worth doing .
If you take a factory bolt to Fastenall , they should be able to match it to the stud's you need.
 A 500 cfm Holly is a bunch of fuel to throw at a little 1300 . Even with a turbo......

Title: Re: Suzuki samurai head studs
Post by: Big O on February 12, 2016, 10:59:53 AM

http://www.xtremezuksoffroad.com/ (http://www.xtremezuksoffroad.com/)

All they do are Samurai