ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: dustedwatts on November 02, 2012, 08:20:27 AM
-
I bought a 1991 tracker Lsi model, and liked the trim package on the inside, so i decided to transfer it all to my 1994 tracker base, here is some of the pics of the process...
The Two trackers ready for the transfer...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-27141809.jpg)
These are the side, pillar, and door frame panels...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28103232.jpg)
These are panels from the 94 rear seat belt pillar, rear side panels...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28134828.jpg)
Center pillar before...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28114825.jpg)
Front before...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28114834.jpg)
My son taking out the rear bench seat..from 94...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28122754.jpg)
Taking side panels from 94...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28125128.jpg)
Rear side before....
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28114808.jpg)
Rear side before...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28114752.jpg)
HMMM little rust, I cleaned it up, used a grinder untill i had clean bare metal, used rust converter and painted,,
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28130453.jpg)
Rear before...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28125140.jpg)
Had to take a break to put fish on to smoke... YUMMMM
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-28165014.jpg)
Passenger side mostly done...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-29132224.jpg)
Center...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-29132203.jpg)
Rear almost done....
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-29132146.jpg)
*^%*&%*& I broke radio bezel when i took it out.....
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-31182353.jpg)
Cleaned and used permatex plastic weld, also put tooth picks on each side to give some extra strength...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-10-31185354.jpg)
Dash all done...
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-11-01185442.jpg)
Rear bucket seats replaced original rear bench...bolts were there just had to cut carpet to access..
(http://i832.photobucket.com/albums/zz243/dustedwatts/2012-11-01185425.jpg)
Have more to do, I am taking the rear bench out,, still have the vinyl to paint on the front seats, drivers door panel, and center console panels and a bunch of other little things......to be continued....