ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: SIDEKICK65 on April 05, 2011, 01:52:13 PM

Title: Performance cam & crank grind's
Post by: SIDEKICK65 on April 05, 2011, 01:52:13 PM

I thought i would pass this info on to help you out  if you ever need a crank or cam done up for your zuki or what ever your drive.i get my stuff done up there and they do it all in house.performance cam grind $50.00 crank turn $75.00.balance crank's $75.00 they do great work and you talk with the guy thats doing your work.they been there for year's. 8) 8)

                                                                                      Red Line Cams & Cranks
                                                                                      2000 Broadway St SW, Albany, OR 97321
                                                                                            (541) 967-4187

Title: Re: Performance cam & crank grind's
Post by: Jluck on April 13, 2011, 10:34:05 PM

any word on this? have you got anything back or tried yet?

Title: Re: Performance cam & crank grind's
Post by: SIDEKICK65 on April 14, 2011, 03:01:40 PM

Yes i have had them do a few cam's for my old toyota's and mazda's that i had. im getting ready to have them grind a cam up for my zuki and ill see how i like it after it's done.

Title: Re: Performance cam & crank grind's
Post by: Jluck on April 14, 2011, 03:08:13 PM

keep peps posted. especially if they can make a torque profile instead of the top end only.

Title: Re: Performance cam & crank grind's
Post by: wildgoody on April 14, 2011, 09:55:25 PM

I had Engle Cams in Santa Monica Ca. do a custom grind on my stock cam
to a PT5 which is for a slight performance Pinto engine grind, I don't know
the spec but I am very pleased with how it works, this was an 8V cam, not
sure how it would translate over to a 16V engine

Wild