ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Build Diaries, How-To, DIY => Topic started by: rascott on March 28, 2009, 07:42:33 PM
-
i'm almost ready for my first run of the season. i expect to make a fish run into the sierras(CA)at the end of april.
made a couple of modifications.
i put a winch on the front- smittybuilt xr8, an extra battery, and a HF air pump(my buzzbox took forever).
built a mount to get winch as close as i could.
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280103.jpg)
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280102.jpg)
mounted the solenoid box in the engine compartment.
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280100.jpg)
added a power post, 'cause i put another battery behind the seat.
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280101.jpg)
put in a battery switch.
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280101-1.jpg)
made a bracket for the winch control plug socket and a voltmeter.
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280104.jpg)
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280105.jpg)
put one of those high volume HF compressors in back(and bagged the hose).
(http://i301.photobucket.com/albums/nn56/rascott_2008/P3280106.jpg)
i'm excited.
just remembered- i am trying a pacesetter header. i removed the cat. and put a 29"(mabe 27" i forget) cherry bomb glasspack on then another CB muffler 'cause it was way too loud.
looking forward to see how that does.
-
nicely done looks good
-
Any pictures of the winch mount before you put the winch in?
Derek