ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: dustybadlands on January 30, 2009, 05:51:51 PM

Title: Larger Master Cylinder that fits TRACKERS
Post by: dustybadlands on January 30, 2009, 05:51:51 PM: Better brakes are always a good thing and with the 33X12.50's and all the extra armor, in my case they're a necessity. I'm puttin' together the parts for a rear disc brake conversion, goin with Nissan 300 ZX calipers but which master cylinder to use eludes me. Ack's facts had a link that suggested that Subaru Imprezza's bolt right on Sammies. Will they bolt on similarly to a 93 Tracker? What about Mazda 929's MC?
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: Rhinoman on January 31, 2009, 06:07:53 AM: Have a look round a junkyard. A lot of Jap cars have Nissin brakes, you will want a disc/disc master cylinder.
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: bentparts on January 31, 2009, 11:18:54 AM: Maybe a Trackick 4 door master cylinder? I know their a bit more powerful, and slightly bigger bore. Got one waiting to go in mine soon.
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: dustybadlands on January 31, 2009, 10:53:49 PM: the post I read said the subaru MC was a direct bolt on to a Sammy, does that mean it'll do the same to a Tracker? It had a 1 1/16" bore.

http://www.zukikrawlers.com/showthread.php?p=295080#post295080

page down
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: cj on February 01, 2009, 02:41:14 AM: I'm currently fitting one to a SJ410 and it has a different bolt pattern to the one I pulled out but the Kick may be the same as the Subaru.
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: Rhinoman on February 01, 2009, 12:43:27 PM: This doesn't look right for a Kick. I thought the Nissin m/c had the mounting holes at an angle (I have Lucas brakes!)
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: RACER X on February 01, 2009, 01:03:15 PM: Jap cars ???? Racist
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: locjaw on February 01, 2009, 05:27:53 PM: jap wouldnt be racist, just real lazy :P
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: Jeremiah on February 01, 2009, 11:36:39 PM: Quote from: locjaw on February 01, 2009, 05:27:53 PM
jap wouldnt be racist, just real lazy :P

x2

Depends on the context. An internet forum (where people are lovers of Japanese vehicles, I would think "Jap" is just short-hand for "Japanese". "Jap" is only used as a derigitory terms by people who were old enough to remember WWII.
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: Rhinoman on February 02, 2009, 02:59:01 PM: Quote from: RACER X on February 01, 2009, 01:03:15 PM
Jap cars ???? Racist

Well I consider myself a Brit, is that a racist term?
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: bentparts on February 02, 2009, 03:01:16 PM: ;) :) I doubt it ya tea swillin' limey! But seriously Rhinoman, LUCAS ( Prince of darkness ) Lights? Your kidding right?
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: Rhinoman on February 03, 2009, 02:09:14 PM: Quote from: bentparts on February 02, 2009, 03:01:16 PM
;) :) I doubt it ya tea swillin' limey! But seriously Rhinoman, LUCAS ( Prince of darkness ) Lights? Your kidding right?

The brakes are Lucas Girling. I'm not sure about the headlights, possibly not they're 12V ;D. I'm looking to fit the Nissin servo from a SWB to mine so I can use the LWB master cylinder. I have the LWB brakes front and back and I now get too much pedal travel, I know that the LWB servo is far to big. Thats why I queried the bolt pattern. I have the servo but haven't taken it out of the box yet, its snowing here and I don't have a garage that the Zuk fits in.
Hmm, time for a cuppa.
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: dustybadlands on February 03, 2009, 08:29:08 PM: A'ight bruthas, lemme phrase dis diffenly. Would say, aTracka's (rhymes wit "cracka") massa cylinda fit on a say, Sammy? O habout a Sammy's on a Tracka? Cracka!
Title: Re: Larger Master Cylinder that fits TRACKERS
Post by: dustybadlands on February 05, 2009, 09:04:14 PM: Now I guess that's racist. Sorry, let me translate: Will Tracker and Sammy MC's interchange?