ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Ira88888 on January 07, 2009, 05:27:52 AM

Title: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Ira88888 on January 07, 2009, 05:27:52 AM

Around the rear windows, where it curves around the rear tail lights, the plastic molding that the top gets hooked onto on the bottom edge is broken in a few places. I have a FEW of the broken pieces and could probably epoxy them back on, but I would prefer to fix it 100%.

I have been and can continue to live with this, but I would rather not. I recall looking last year for  replacement hardware and no luck at all.

95 2-door Tracker.

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Drone637 on January 07, 2009, 12:21:34 PM

Have you tried calling Hawk Suzuki?  Getting the parts from someone stripping a convertible or a junk yard are probably your only options at this point.

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: SNJSamurai on January 07, 2009, 06:32:35 PM

i got a 91 tracker with the top still on it. if u take some pics to show me what your talking about ill see if mine are still there and good shape and ill sell them to you

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Skyhiranger on January 08, 2009, 05:00:10 PM

Quote from: SNJSamurai on January 07, 2009, 06:32:35 PM

i got a 91 tracker with the top still on it. if u take some pics to show me what your talking about ill see if mine are still there and good shape and ill sell them to you

95 and 91 trackicks use different soft top hardware.....so the stuff you have won't do him any good.

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Drone637 on January 08, 2009, 05:41:18 PM

I thought the change in hardware was on the 96 model.

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Skyhiranger on January 08, 2009, 06:17:19 PM

Quote from: Drone637 on January 08, 2009, 05:41:18 PM

I thought the change in hardware was on the 96 model.

Nope.

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: SNJSamurai on January 08, 2009, 11:09:42 PM

well it was worth a try lol i dont know anything about track/kicks. im just stealing her motor, the rest will go to you guys untill i just scrap it

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Ira88888 on January 09, 2009, 08:10:40 AM

Thanks for the replies, guys.

They're not all that complicated pieces to fabricate--except I'm totally spastic with this stuff. Where is Hawk Suzuki located?

Title: Re: Advice on Fixing/Finding Soft Top Plastic Body Molding?
Post by: Drone637 on January 09, 2009, 09:15:05 AM

Oregon!  Or at http://www.hawksuzukiparts.com/