ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: the joker on March 28, 2007, 04:44:43 AM
-
i want a twin stick settup who makes them or sells them or info on making one my self
-
pm 37kicker (stan) he was making them for a while
jason
-
He still does, I PMed ya his info.
-
thanx for the info so far. it is for a 92 trackkick and i,am in new brunswick canada so can i get this in canada.
-
He still does, I PMed ya his info.
i would like information on this too. if you could mike
-
i'm still making them. shipping might be a little more. pm me. stan
-
i;ll get a hold of next week i.am going to the camp this weekend and we will talk about it thanx stan
-
Do you have any pics of your twin sticks by any chance?
Amilla
-
How much does he charge for the Twin Stick kit.
-
could you give us some pictures of the twin stick set up. i would like to see how its setup
-
Iwant one!
-
i'll work on getting some pixs. stan
-
Are these for Track/Kicks or Sami's? I know they make them for Sami's, but I haven't seen them for Track/Kicks yet.
-
the ones i make are for trackers. stan
-
Hey Stan,
I'm interested. I'd like to see a photo also. How much does a set cost? Thanks,
Dean
-
is it posable to get the info on makin one of these myself i got lots of parts
-
COMMON HOW MUCH ;D
-
I would be interested in one too. please email me at thebigsgt|removethispart|@hotmail.com
-
I think stan is selling them for $125 shipped to the lower 48. If your out of the country you will have to work it out with him. Stan doesnt know how to post pics. I will try to get some pics either tonite or tomorrow.
Mike
-
I love my twin stick setup,works awesome ,easy install ;D
-
I love my twin stick setup,works awesome ,easy install ;D
I coudn't agree more. The twin stick rocks. It makes my zuk so much more managable to drive witha front locker. It's worth every penny.
For a dust boot I took a heavy rubber glove (like the ones for house hold cleaning). Cut it down to just two fingers. I then cut a small hole on the end of each finger and stuck the twin sticks through the holes. I zipped tied the bottom of the glove around the top of the transfer case where the groove is for the normal boot. I then wrapped some black electrical tape around the fingers on the twin stick. It keeps the 90 w in the T-case. I freakin hate the smell of that stuff.
-
I think stan is selling them for $125 shipped to the lower 48. If your out of the country you will have to work it out with him. Stan doesnt know how to post pics. I will try to get some pics either tonite or tomorrow.
Mike
Now i need to know what we're talking about here. What does roughly $125 get you? The ability to drive the front or rear drivetrain independantly? Or is this for gear reduction?
-
It allows you you to disengage your front end, but still have the capability of low range in 2wd.
-
Are there any mods to the t-case needed or is it a drop in mod? Any luck with those pics Mike?
-
Are there any mods to the t-case needed or is it a drop in mod? Any luck with those pics Mike?
I was over there and forgot. ::) I am going back over tomorrow, I will try not to forget this time. :P The case needs to be separated to remove one detent ball. If your doing a 4 to 1 you already have that ball out.
Mike
-
I want a twin stick for my sami!!!
:'( I feel left out!
-
here is what it looks like out of the truck.
(http://www.zukiworld.com/forum/index.php?action=dlattach;topic=16663.0;attach=3783)
-
Did you get any pics of them installed? Will they fit a Grand Vitara?
-
Are there any mods to the t-case needed or is it a drop in mod? Any luck with those pics Mike?
I was over there and forgot. ::) I am going back over tomorrow, I will try not to forget this time. :P The case needs to be separated to remove one detent ball. If your doing a 4 to 1 you already have that ball out.
Mike
I have my case out at the moment as a set of Trail Tough's crawler gears have just gone in along with a full rebuild and I have had the output drilled and tapped so I can do a SYE and possibly put a rear disconnect on it. It's all back together but not in the Kick. I didn't do the install so I didn't know about the detent ball needing to be removed. If this is the case and it has already been done, will I need to open the case up again or can I just swap in the Twin stick? This would be the icing on the cake if I can just drop it in because then I could put the t-case back in and just swap in the sticks when I get them without having to pul the t-case again.
-
you will have to split the case & remove the d-tent ball still. stan
-
That's ok. If we can organise it so you can ship one soon I'll wait before I put the case back in. I've sent another PM ;D
-
you will have to split the case & remove the d-tent ball still. stan
CJ said he already has done the 4 to1 gears in the case, mike states that if it was done already that the d-tent ball will be out already, therefore the case should be ready for the twin stick. Not saying this is right or not, just what I read. Hate to see a guy tear open the transfer case for nothing. Cheers.