ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: INGERSOL on February 17, 2005, 09:49:23 AM
-
So I'm looking at importperformanceparts.com and I see what looks like a rebuild kit for my tracker. So my question is:
If you go with the oversize 85mm pistons , and you choose the hold onto your nutsack 11:1 compression ratio pistons, rings, etc....what kind of performance improvement should we be looking at?
Suzuki Vitara 16V DOHC 1995cc 1999 +up
Engine
Code Stock
Bore Kit # Includes: Price
J20A 84mm EKSZ7VMPX Complete Gasket Set
Copper Performance Head Gasket
ROSS Forged Pistons
(84, 84.5, 85mm) and
(9.1-1, 10.1-1, 11.1-1 comp ratio)
Performance Rings
Performance Wrist Pins
TOGA HP Main Bearings
TOGA HP Rod Bearings
Thrust Washers
$979
http://www.importperformanceparts.net/imports/pek-suzuki.html
Also...I've been looking at Suzisport's ECU re-programmer. Has anybody tried it? I've seen lots of similar products for regular american trucks, and the performance figures a reprogrammer can provide are astounding (especially on a diesel). Anybody have an experience with this product?
(http://www.suzisport.com/shop/media/link2.jpg)
Here's the link: http://www.suzisport.com/shop/ somewhere in there...
-
moter go boomboom after not much milage. yeah good luck with that one.
:'( :'( :'(
-
unfortunately like myself
the 2.0 litre seems to work very hard
I think personally cause it's cam'd for low torque rpm
but it definately has enough power at 3700 rpm and up
I don't think it's worth while to get minimal power out of a engine not designed to be performance/high reving orentiated
-
yea if your going mud running and can get some 100ll from the airport but if you want power why not put a 6 init