Hello Guest
« previous next »
Pages: [1]   Go Down

flywheels

  • 13 Replies
  • 2984 Views

0 Members and 4 Guests are viewing this topic.

*

Offline aviation officer

  • 49
  • 1
flywheels
« on: July 28, 2011, 01:36:53 PM »
Im going to replace the clutch on my 91 sidekick 8 valve. i was going to buy a 16 valve flywheel and get the 16 valve clutch. i wanted to know if the 16 valve flywheel will go on an 8 valve engine and if the flywheel will fit in the bell housing?
Logged
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: flywheels
« Reply #1 on: July 28, 2011, 08:14:37 PM »
Yes it will work, I put an 8V flex plate onto a 16V crank
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: flywheels
« Reply #2 on: July 28, 2011, 11:44:55 PM »
You shouldn't need to replace the flywheel, I believe the clutch will just swap on.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: flywheels
« Reply #3 on: July 29, 2011, 11:30:00 AM »
8V and 16V flywheels are identical.  You can put the larger 8.5" diameter "16v" clutch on an 8V flywheel.
Logged
Tracker and Sidekick parts for sale.....PM me with your wants/needs.
*

Offline aviation officer

  • 49
  • 1
Re: flywheels
« Reply #4 on: July 30, 2011, 08:23:59 PM »
thanks guys. that helps alot and saves me some money.
Logged
*

Offline aviation officer

  • 49
  • 1
Re: flywheels
« Reply #5 on: July 31, 2011, 07:27:28 AM »
is there an advantage using a 16v clutch on an 8v.
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: flywheels
« Reply #6 on: July 31, 2011, 09:08:16 PM »
They are the same.  It's 2-door vs 4-door where you see the difference.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: flywheels
« Reply #7 on: July 31, 2011, 09:10:05 PM »
Quote from: aviation officer on July 31, 2011, 07:27:28 AM
is there an advantage using a 16v clutch on an 8v.

You get a bigger clutch with more holding power.  Nothing wrong with that.
Logged
Tracker and Sidekick parts for sale.....PM me with your wants/needs.
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: flywheels
« Reply #8 on: August 01, 2011, 04:55:49 PM »
The way I see it it has more square inches of area so more square inches = less pounds per square inch of holding power from the same pressure plate.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: flywheels
« Reply #9 on: August 01, 2011, 05:00:27 PM »
Quote from: mrfuelish on August 01, 2011, 04:55:49 PM
The way I see it it has more square inches of area so more square inches = less pounds per square inch of holding power from the same pressure plate.

I guess that is where you are wrong.
The added friction area outweighs your ppsi of holding power theory.

If your theory was correct, then smaller brake pads would be better than larger ones.
Logged
Tracker and Sidekick parts for sale.....PM me with your wants/needs.
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: flywheels
« Reply #10 on: August 01, 2011, 05:16:27 PM »
More surface area requires less pressure to do the required amount of work,
the same principals work in Hydraulics too, a cylinder with twice the diameter
will exert 4 times as much force with the same pressure input, not twice as much
as most people would think
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline aviation officer

  • 49
  • 1
Re: flywheels
« Reply #11 on: August 01, 2011, 05:17:18 PM »
is a 4 door flywheel and clutch bigger than the 2 door flywheel and clutch
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: flywheels
« Reply #12 on: August 01, 2011, 05:24:47 PM »
I don't think the Hydraulics theory Is the same thing, I think compairing it to an elephants foot in mud verses a humans foot, the elephant would float on the mud but the human would hit the dirt at the bottom and have more solid ground to push off from. Lol.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: flywheels
« Reply #13 on: August 01, 2011, 07:38:38 PM »
Quote from: aviation officer on August 01, 2011, 05:17:18 PM
is a 4 door flywheel and clutch bigger than the 2 door flywheel and clutch


Have you not been paying attention? :P
All 1.6 flywheels are the same...no matter if they came from an 8v, 16v, 2 door or 4 door.
All 1.6 8Vs had a 7.9" diameter clutch.
All 1.6 16Vs had an 8.5" diameter clutch.
So you can use either a 7.9" or an 8.5" diameter clutch on any 1.6 flywheel.
Logged
Tracker and Sidekick parts for sale.....PM me with your wants/needs.
Pages: [1]   Go Up
« previous next »