8v tracker motor hoses, photo would help

BRD HNTR

2300
56
Gender:

8v tracker motor hoses, photo would help

« on: January 07, 2009, 04:40:12 PM »

I am changing out the motor in a 93 Tracker 8v, and lost track of where some hoses go. A photo of back corner of the intake would help. I need to know where the hose that comes out of the corner below the tbi goes to, and the hose below that comes out of underside of intake goes to. Also where the larger hose comes from on the vacuum canister on right side front of motor compartment.
Thanks

Logged

93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes, ARB front & rear, converted Sami rear to IFS, 33x12.5x15 aluminum rims, roll cage, 2.7L w/5 speed auto.

nh

17
0

Re: 8v tracker motor hoses, photo would help

« Reply #1 on: January 09, 2009, 01:19:42 PM »

I took a few pics as I took the 8v out of my 92. I think they'll be the same. I"ll post them tonight if you still need them

Logged

BRD HNTR

2300
56
Gender:

Re: 8v tracker motor hoses, photo would help

« Reply #2 on: January 09, 2009, 05:05:55 PM »

Thanks
I got it running, and found another hose that made everything go together and run better. If you would post them, or pm me I would appreciate knowing that I have it right.

Logged

93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes, ARB front & rear, converted Sami rear to IFS, 33x12.5x15 aluminum rims, roll cage, 2.7L w/5 speed auto.