i have a 3ft x 3ft 1/8inch thick stainless steel sheet, i want to make a front skid plate. just wondering if any one has any ideas or tips on how to cut out a mold of a skidplate?
pls post pics if ya have any.
thanks for looking!

Laser or plasma is the best way, it would
be miserable to try and cut that with a sabre
saw, and no a cutting torch will not work on stainless

Laser or plasma is the best way, it would
be miserable to try and cut that with a sabre
saw, and no a cutting torch will not work on stainless

hahaha... my old man said the samething.

So you got a good second oppinion too 

Stainless would be cool looking for a skid

and if you need to put a nice straight bend in it bust out the poor mans brake angle iron and a sawhorse 

before:




this skid plate is made by a nice guy in Denmark


i'm sorry for the poor qality on the pictures , they are taken on a old nokia cell phone

my best friend installed it this afternoon, luckily it uses some existing holes.

we used 2x M8x25 bolts +2 external torx bolts, i think they are called T-10 (or whatever)

before:




this skid plate is made by a nice guy in Denmark


i'm sorry for the poor qality on the pictures , they are taken on a old nokia cell phone

my best friend installed it this afternoon, luckily it uses some existing holes.

we used 2x M8x25 bolts +2 external torx bolts, i think they are called T-10 (or whatever)

looks good.. i was thinking of a simlar idea, but you just cleared it rite up for me. thanks for the pics.
keep'um comming.

i got no more pictures, but i guess sombody else has it?

other solutions maybe?

guess i did forget so say that it's a GV..