Hello Guest
« previous next »
Pages: [1]   Go Down

header gasket

  • 4 Replies
  • 1229 Views

0 Members and 3 Guests are viewing this topic.

*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
header gasket
« on: April 20, 2007, 11:16:12 AM »
Hey i have what looks to be a Tri-Y header, and the gasket it destoryed on it.
I need to get a new one, Does anyone know if i have to get a Tri-Y gasket or will other ones work.  I noticed that some were coming with round port gaskets, and other square.  I know i need the square port, but why are they selling round if there square?

Thanks

Amilla
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: header gasket
« Reply #1 on: April 20, 2007, 11:21:43 AM »
Dont know why they are selling round port gaskets.  Just get a stock gasket from advanced auto or similar store.  Just make sure it has square ports before u pay for it.
Logged
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: header gasket
« Reply #2 on: April 20, 2007, 02:27:28 PM »
the stock manifold gasket works great. plus it has the heat shields for the plug wires
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: header gasket
« Reply #3 on: April 21, 2007, 04:05:09 PM »
Thats what i just got today, and it works fine.

Ya the added protection of the heat sheilds!  ;D

Thanks for all the info

Amilla
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: header gasket
« Reply #4 on: April 22, 2007, 09:56:47 AM »
Quote from: Amilla on April 20, 2007, 11:16:12 AM
Hey i have what looks to be a Tri-Y header, and the gasket it destoryed on it.
I need to get a new one, Does anyone know if i have to get a Tri-Y gasket or will other ones work.  I noticed that some were coming with round port gaskets, and other square.  I know i need the square port, but why are they selling round if there square?

Thanks

Amilla

Some of the aftermarket headers don't have the ends of the pipes squared off.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
Pages: [1]   Go Up
« previous next »