Hello Guest
« previous next »
Pages: [1]   Go Down

Front and Rear Bumper ?

  • 7 Replies
  • 1885 Views

0 Members and 1 Guest are viewing this topic.

*

Offline RazBarlow

  • 156
  • 0
  • Gender: Male
  • It's Barney !
Front and Rear Bumper ?
« on: March 11, 2009, 04:36:04 PM »
At work today they were going to through away an old frame that a Robot came on. It is made of 1 1/2" X 3 " U channel . I was wondering if anyone made a home built bumper out of U channel and how wide they used ? I was thinking either go with the 3" "tall" or weld two pieces together to make the bumper 6" "Tall " ?
Anyone ever done this ?
Have any pics ?
Thanks,
Raz
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Front and Rear Bumper ?
« Reply #1 on: March 11, 2009, 04:56:12 PM »
Jeep YJ bumpers are basically just a piece of C Stock.  Not sure on the height though.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline RazBarlow

  • 156
  • 0
  • Gender: Male
  • It's Barney !
Re: Front and Rear Bumper ?
« Reply #2 on: March 12, 2009, 04:03:32 AM »
Here is a pic of what I ended up with , then I took the plasma cutter and cut out all the long pieces.
Raz

Logged
*

Offline jeff1997

  • 1228
  • 27
  • Gender: Male
  • Suzuki: A Jeep thing only cheaper!!!!
Re: Front and Rear Bumper ?
« Reply #3 on: March 12, 2009, 06:28:16 AM »
Quote from: RazBarlow on March 12, 2009, 04:03:32 AM
Here is a pic of what I ended up with , then I took the plasma cutter and cut out all the long pieces.
Raz


That is one GIG bumper.  :laugh: Just kidding, I have actually made a couple bumpers for jeeps, Zuk's and stock cars from that type of C-channel. It is strong and  fabbed easy. Happy building.
Logged
1997 4dr. Sidekick Sport 1.8L DOHC
2" coil spacers- I make and sell 1.5" and 2" on e-bay.  Look under seller: hoepkers
3" Masterkit1 body lift
Custom strut spacers
31/11.50/16 Super Swamper LTB's w/1.5" wheel spacers Steel bumpers Custom cold air intake 2" exhaust w/cherry bomb 98 Expedition, 2" lift, 35's, Magnaflow exhaust - BIG BLUE
*

Offline RazBarlow

  • 156
  • 0
  • Gender: Male
  • It's Barney !
Re: Front and Rear Bumper ?
« Reply #4 on: March 12, 2009, 02:39:29 PM »
Like I said , it is only 3" wide/wide. Would that  look too small or look ok ?
Thanks,
Raz
Logged
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: Front and Rear Bumper ?
« Reply #5 on: March 12, 2009, 03:18:25 PM »
It'll be 100x stronger than stock, lighter than box tube, and free material...

Don't see how you can go wrong
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: Front and Rear Bumper ?
« Reply #6 on: March 12, 2009, 06:08:19 PM »
Quote from: RazBarlow on March 12, 2009, 02:39:29 PM
Like I said , it is only 3" wide/wide. Would that  look too small or look ok ?
Thanks,
Raz


I built my rear out of 2X4 tube, and the trimmed the corners with 2X2.  Do the same thing with your channel.  Keep throwing ideas at it until something fits you and the car.


And the thread of how I did it.  http://www.zukiworld.com/forum/index.php?topic=21864.0 Good Luck.
Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline suzukiboyoz

  • 194
  • 1
  • Gender: Male
  • Friends don't let friends ride a Yamaha
    • http://community.webshots.com/
Re: Front and Rear Bumper ?
« Reply #7 on: March 18, 2009, 04:39:04 PM »
I build y rear bar out of U channel.



Logged
Calmini 3" Suspension Lift, Calmini Skid Plates, Calmini Rockhoppers, 30" Mud TYres, ARB Bullbar, Rear ARB Locker, Custom Sill Sliders, Rear Bumper and a lot more.
Pages: [1]   Go Up
« previous next »