Hello Guest
« previous next »
Pages: [1]   Go Down

Look like crank wobble? (Video)

  • 3 Replies
  • 1698 Views

0 Members and 4 Guests are viewing this topic.

*

Offline zuki1018

  • 397
  • 7
Look like crank wobble? (Video)
« on: September 22, 2011, 01:35:32 PM »
Hey folks.  I am battling an issue here with a related megasquirt issue. Long story.

Anywho, fresh shade-tree rebuilt 16v.  You may have to replay it a couple of times.  Look at the belt guides not the sprocket I installed.  I am wondering if this is typical pully wobble or if I should pull the engine and check things out.  Thanks for looking.


Logged
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Look like crank wobble? (Video)
« Reply #1 on: September 22, 2011, 07:00:08 PM »
I doubt the crank is the problem, I bet the pulley is
just a little tweaked, but they are thin so if you try
and tap it, you might make it worse

 
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Look like crank wobble? (Video)
« Reply #2 on: September 25, 2011, 02:37:20 PM »
Check that the keyway is good and that the pulley is properly seated and then make double sure that the centre bolt is torqued correctly.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline zuki1018

  • 397
  • 7
Re: Look like crank wobble? (Video)
« Reply #3 on: September 26, 2011, 11:54:28 AM »
Thanks for the opinions.
Logged
Pages: [1]   Go Up
« previous next »