Hello Guest
« previous next »
Pages: [1] 2   Go Down

Samurai build advice

  • 21 Replies
  • 9113 Views

0 Members and 1 Guest are viewing this topic.

*

jplowman2005

Samurai build advice
« on: February 05, 2008, 01:10:21 PM »
I purchased a 88 samurai about 2 months ago that has 31x12.50 boggers, spring over,4.19 transfer case gears, cage, winch, bumpers, and a couple other little things...the first month i had it i didnt get to drive it, and the last month ive went every weekend and have loved it..These things are mini tanks...Well my motor is about done for so im going to swap in a 1.6 16v tracker motor sometime here soon... when thats finally done i plan on converting over to wrangler leaf springs and yota axels..this is where i need help on what size tires i should get so i know which leaf springs to get...im wanting 33x14  boggers but i was thinking about 35s and didnt no if that would be to big???? Im looking for all around performance, so which size do you think would be best? any help would be great...josh
Logged
*

MaD.72

Re: Samurai build advice
« Reply #1 on: February 05, 2008, 02:21:42 PM »
Look at the post below There talking about that!!
Logged
*

jplowman2005

Re: Samurai build advice
« Reply #2 on: February 05, 2008, 03:51:32 PM »
maybe you could paste the link here for me...all i see is stuff about a lift, and what kind of axels, which is stuff that is no help to me...pretty much i guess im asking for the samurai being the size it is would 33's or 35's be more use
Logged
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: Samurai build advice
« Reply #3 on: February 05, 2008, 06:01:21 PM »
35" on a samurai seems too big to me. I'm almost unstoppable in my 31" unlocked. I like keeping my lower CG though....
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Samurai build advice
« Reply #4 on: February 05, 2008, 06:58:41 PM »
I was considering the upgrade to 35" tires, but decided there really wasn't much I couldn't climb up with the 33x12.5" tires, and I don't break that much either.  Heck, took me 3 years to go through my first birf and rear axle.

Now if only they hadn't gone within 5 minutes of each other...  :P

I wouldn't go with the 14.5 width though, just a bit to wide.  You might try and find a used pair of 33" or 35" tires to test your rig out with after you do the lift.  Or even better, find a pair you can borrow for a run to help you decide.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

MaD.72

Re: Samurai build advice
« Reply #5 on: February 06, 2008, 04:10:04 AM »
Logged
*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: Samurai build advice
« Reply #6 on: February 06, 2008, 08:47:58 AM »
Here is a sammi on 35s, YJ leafs, shackle reverse, with the front pushed 3" forward and the rear back 3".  Looks good to me and nice and flexy.


Amilla
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

MaD.72

Re: Samurai build advice
« Reply #7 on: February 06, 2008, 09:06:25 AM »
Ole sh..!! nice rig!!
Logged
*

doghows

Re: Samurai build advice
« Reply #8 on: February 06, 2008, 09:29:43 AM »
     That is a sweet rig. That is the direction I am looking to go. Do you have any more pics of that one??? thanks  8)
Logged
*

jplowman2005

Re: Samurai build advice
« Reply #9 on: February 06, 2008, 11:23:42 AM »
ok after lots of help and and advice i think im gonna get the 33" boggers. but im not shure if i want the 12.50 or 14" width...Its still tempting to put 35s on after seeing that picture...amilla please post more pics if you got any..thanks josh
Logged
*

jplowman2005

Re: Samurai build advice
« Reply #10 on: February 06, 2008, 12:09:01 PM »
so i just got done looking at about every page of the members ride thread and found another tire i like that alot of other people are running..There 34x10.50 ss Ltbs, any one have any expierence with these tires...
Logged
*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: Samurai build advice
« Reply #11 on: February 06, 2008, 12:37:39 PM »
I plan on running a 34x10.5 LTB on my sami once i get it all set up, i want to stick with a narrow wheel because the sammi weight is so low.  No need for some really wide tired, for the kind of wheeling that i do.

This sami is not mine, i have just been half assed copying this samurai. Doing mostly the same stuff he is doing.  He is running a 4.16 T case with 5.29s R&P's.  His steering box is out of a Toyota Celica, of which I'm also planning on doing.

Here are some more pics for your viewing pleasure.
(The builder of this rig is Samota87 on pireat4x4)






There ya go

Amilla
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

big_kountry21

Re: Samurai build advice
« Reply #12 on: February 06, 2008, 02:11:32 PM »
nice rig!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Logged
*

jplowman2005

Re: Samurai build advice
« Reply #13 on: February 06, 2008, 02:42:35 PM »
amilla what kind of wheeling do you do that your better off with 10.50s?Around where i live its mostly mud/dirt, hills, trails etc what width do you recommend for that
Logged
*

WomenLoveMyZuki

Re: Samurai build advice
« Reply #14 on: February 06, 2008, 02:45:09 PM »
If for some reason my Zuki doesn't mee the low reserve then I will offer to sell you my 1.6L for a really good deal because I will be keeping her and putting in a small block Chevy 350 with automatic transmission from Zuki Conversions, Inc...

http://cgi.ebay.com/ebaymotors/Samurai-SPOA-Little-Bigfoot-Garage-kept-Monster-Truck_W0QQitemZ110220441390QQihZ001QQcategoryZ6468QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Logged
Pages: [1] 2   Go Up
« previous next »